508639
52
Zoom out
Zoom in
Previous page
1/62
Next page
51
3
A
B
C
D
E
F
E
1.
2. 3.
5.
4.
6.
7. 8.
E
3.6. Practical Sewing - Serger / OL Mode
3.6. Costura práctica - Overlock
3.6. Praktisches Nähen - Overlock
3.6. Couture - surjet
Blind stitch foot
1. Attach the blind stitch presser foot (A) (See page 17 changing
the presser foot ).
2. Thread the machine for a 3-thread overlock using the right-
hand needle (B) only.
3. Turn the stitch length adjustment dial (C) to 4.
4. Set the thread tension:
Needle thread (green) = 3-4
Upper looper thread (blue) = 3-5
Lower looper thread (red) = 4-5
5. Fold the fabric and place it (D) under the presser foot.
6. Adjust the guide plate (E) to the left or right until the fold of
the fabric (F) is in a line with the right-hand needle.
7. Sew the fabric so that the fold is always along the guide (E).
8. Unfold the fabric and press lightly on the back side.
Pie prénsatelas para punto invisible
1. Sujetar el pie prénsatelas para punto invisible en el vástago
(A). Para ello consultar la página 17, cambio del pie
prénsatelas.
2. Enhebrar la máquina para punto Overlock de 3 hilos en la
aguja derecha (B)
3. Colocar el largo del punto a su regulación de base 4 (C)
4. Regular las tensiones de los hilos:
Tensión de la aguja (verde) = 3-4
Lanzadera superior (azul) = 3-5
Lanzadera inferior (rojo) = 4-5
5. Sujetar el tejido y colocarlo como indicado (D) debajo del pie
prénsatelas.
6. Desplazar la guía (E) hasta que el borde del tejido esté
debajo de la aguja (F).
7. Coser el tejido de manera que el canto doblado toque
siempre la guía (E).
8. Abrir el tejido y plancharlo ligeramente por la parte del revés.
Blindstichfuss
1. Blindstichfuss am Schaft befestigen (A). Siehe hierzu Seite
17, Nähfuss auswechseln.
2. 3 Faden OL mit Nadel rechts einfädeln (B)
3. Stichlänge auf Grundeinstellung 4 stellen (C)
4. Fadenspannungen einstellen:
Nadelspannung (grün) = 3-4
Obergreifer (blau) = 3-5
Untergreifer (rot) = 4-5
5. Stoff falten und wie gezeigt (D) unter den Nähfuss legen.
6. Führung (E) verschieben, bis die Kante des Stoffes unter der
Nadel liegt (F).
7. Den Stoff so nähen, dass die Faltkante immer an der
Führung (E) anschlägt.
8. Den Stoff aufklappen und auf der Unterseite leicht bügeln.
Pied pour points invisibles
1. Fixer le pied pour points invisibles sur la tige (A) Consulter la
page 17, changer le pied-de-biche.
2. EnÞ ler 3 Þ ls de surjet avec l’aiguille droite (B).
3. Régler la longueur de point sur le réglage de base 4 (C)
4. Régler la tension du Þ l:
Tension de l’aiguille (vert) = 3-4
Boucleur supérieur (bleu) = 3-5
Boucleur inférieur (rouge) = 4-5
5. Plier le tissu et glisser sous le pied comme illustré (D).
6. Déplacer le guide (E) jusqu’à ce que le rebord du tissu
repose sous l’aiguille (F).
7. Coudre le tissu, le rebord replié doit toujours toucher le guide
(E).
8. Déplier le tissu et repasser légèrement sur l’envers.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 1150MDA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 1150MDA in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 1150MDA

Bernina 1150MDA User Manual - Dutch, Italian - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info