508639
26
Zoom out
Zoom in
Previous page
1/62
Next page
2.3. Adjustments and Settings / 2.3. Regulación y manejo
2.3. Einstellen und Bedienen / 2.3. Réglage et utilisation
25
2
Micro Thread Control (mtc)
This machine is equipped with a patented Þ ne tuning feature called mtc.
This will help you to get easier control of your seam quality, with less effort.
For threading the machine to any stitch conÞ guration always adjust mtc to the
neutral position (N).
After a good setting for cutting width and individual thread tension balance was
found proceed with a sewing test.
Using mtc you may now Þ ne tune the amount of the overedge thread.
(A) If the thread is loose around the edge turn the mtc lever towards Min.
(B) If the thread is tight and curls up the fabric turn the mtc lever towards Max.
Note: mtc is most effective for seam width 5 - 7 mm (Cutting Width position 1-3)
For seam width of 7-9mm the adjustment range is limited.
mtc - Control Þ no del hilo
Este aparato está dotado del mtc control Þ no del hilo patentado con cuya ayuda
Usted alcanzará una calidad óptima de su costura.
Antes de empezar su trabajo con un nuevo punto, regule el mtc en su posición
central/neutral (N).
Después de la regulación adecuada de la tensión del hilo y de la anchura del
corte, haga una costura de prueba.
Con el mtc control Þ no del hilo puede ahora regularse el largo del hilo para el en-
lazamiento.
(A) girar el botón mtc dirección min. si el lazo está muy ß ojo
(B) girar el botón mtc en dirección max. sie el lazo es demasiado corto o el tejido
se enrolla en la costura.
Indicación: el mtc control Þ no del hilo es más eÞ caz con un ancho del punto de 5
a 7 mm (regulación 1-3)
Para anchuras de 7 a 9 mm está limitada la regulación.
mtc Fadenkontrolle
Dieses Gerät ist mit der patentierten Fadenkontrolle mtc ausgerüstet, mit deren
Hilfe Sie einfach eine optimierte Qualität Ihrer Nähte erreichen.
Jedesmal, wenn Sie die Maschine auf einen neuen Stich einstellen, beginnen Sie
mit dem mtc Knopf in Mittelstellung (N).
Nachdem eine passende Grundeinstellung der Fadenspannungswerte und der
Schnittbreite gefunden ist, machen Sie einen Nähtest.
Mit der mtc Fadenkontrolle kann nun die Länge des Schlingfadens einreguliert
werden.
(A) mtc Knopf gegen Min. drehen, wenn der Schlingfaden übersteht und lose ist
(B) mtc Knopf gegen Max. drehen, wenn der Schlingfaden zu kurz ist oder sich
der Stoff in der Naht rollt.
Hinweis: Die mtc Fadenkontrolle ist am wirkungsvollsten im Bereich der Schnittb-
reiten von 5 - 7mm (Einstellung 1 - 3)
Für Schnittbreiten 7 - 9 mm ist der Einstellbereich begrenzt.
Microcontrôle du Þ l mtc
Cette machine est équipée d’une fonction brevetée de microcontrôle du Þ l mtc qui
est destinée à vous faciliter le contrôle de la couture.
Avant de commencer votre travail, réglez le mtc sur sa position neutre (N).
Après le réglage de la position du couteau et de la tension du Þ l, effectuez une
couture d’essai.
La fonction mtc vous permet d’effectue un réglage Þ n.
(A) Si le Þ l est relâché, tournez le mtc sur min.
(B) Si le Þ l est trop tendu, tournez le mtc sur max.
Remarque: le mtc est parfaitement réglé pour les coutures de 5 à 7 mm de large
(position de coupe 1-3). Le réglage sera moins précis pour les coutures de 7 à 9
mm de large.
Min MaxN
BA
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 1150MDA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 1150MDA in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 1150MDA

Bernina 1150MDA User Manual - Dutch, Italian - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info