Manual Berner FLT100 (page 41 of 80) (English, German, French)

633664

Zoom out

Zoom in

1/80

06.2007 TR30G008 RE

5.6.10 Menu 41 - transferring data to report unit

By selecting menu 41, the data stored in reader 1

can be transferred to the report unit. This data

includes the access code, the location numbers

assigned to the fingerprints, the security setting and the pulse duration

of the relays. This function makes it possible to replace a defective

report unit with a new one and load the appropriate access data. The

transmission is performed by pressing the “P” button for 4 seconds.

The display “Cr” will flash during reading and then automatically

return to the menu display “nn”. If the process should be aborted,

briefly press the “P” button to return to the menu display “nn”.

5.6.11 Menu 42 - securing data in reader 1

By selecting menu 42, the data stored in the report

unit can be transferred to reader 1 and secured.

This data includes the access code, the location

numbers assigned to the fingerprints, the security setting and the

pulse duration of the relays. The transmission is performed by

pressing the “P” button for 4 seconds. The display “Sr” will flash

during reading and then automatically return to the menu display

“nn”. If the process should be aborted, briefly press the “P” button

to return to the menu display “nn”.

5.6.12 Menu 43 - resetting to ex-factory setting

By selecting menu 43, you can reset the report unit

and all connected readers to the ex-factory setting.

In doing so, all fingerprints will be deleted, access

code entry for programming deactivated, the security settings set to

standard and the relays set to a pulse duration of 0.5 seconds. The

reset is done by pressing the “P” button for 4 seconds. The display

“CA” flashes during the reset and then changes to display “AC”

(all cleared).If the process should be aborted, briefly press the “P”

button to return to the menu display “nn”. ➤

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Berner FLT100 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Berner FLT100 Manual

Product: