680440

Berner C500 Manual

42
Zoom out
Zoom in
Previous page
1/144
Next page
17 Overview of DIL Switch Functions
DIL 1 Installation direction
ON Gate closes to the right (as viewed from the operator)
OFF Gate closes to the left (as viewed from the operator)
DIL 2 Set-up mode
ON Set-up mode (limit switch and OPEN end-of-travel position) / delete gate data (reset)
OFF Normal mode in press-and-release operation
DIL 3 Type of SE1 safety device (connection at terminal72) when opening
ON Safety device with testing (SKS activating kit or photocell)
OFF 8k2resistance contact strip, photocell from another manufacturer or none (8k2 resistance between terminal72
and 20)
DIL 4 Effect of SE1 safety device (connection at terminal72) when opening
ON SE1 activation triggers brief, immediate reversing (for SKS)
OFF SE1 activation triggers brief, delayed reversing (for photocell)
DIL 5 Type of SE2 safety device (connection at terminal73) when closing
ON Safety device with testing (SKS activating kit or photocell)
OFF 8k2 resistance contact strip, photocell from another manufacturer or none (8k2 resistance between terminal73
and 20)
DIL 6 Effect of SE2 safety device (connection at terminal73) when closing
ON SE2 activation triggers brief, immediate reversing (for SKS)
OFF SE2 activation triggers brief, delayed reversing (for photocell)
DIL 7 Type and effect of SE3 protective device (connection tml. 71) when closing
ON SE3 protective device is a dynamic 2-wire photocell
OFF SE3 protective device is a non-tested, static photocell
DIL 8 DIL 9 Operator function (automatic timed closing) Option relay function
ON ON Automatic timed closing, pre-warning time for
each gate movement
Clocks rapidly during pre-warning phase,
normally during travel phase, is OFF during hold-
open phase
OFF ON Automatic timed closing, pre-warning time only
for automatic timed closing
Clocks rapidly during pre-warning phase,
normally during travel phase, is OFF during hold-
open phase
ON OFF Pre-warning phase for each gate movement
without automatic timed closing
Clocks rapidly during pre-warning phase,
normally during travel phase
OFF OFF No special function Picks up in the CLOSE end-of-travel position
DIL 10 Through-traffic photocell with automatic timed closing
ON SE3 protective device activated as through-traffic photocell
OFF SE3 protective device not activated as through-traffic photocell
DIL 11 Set reversal limit
ON Reversal limit set step-by-step
OFF Normal mode
DIL 12 Setting the slow speed starting point for opening and closing
ON Starting points for slow speed when opening and closing
OFF Normal mode
42
C300 - C800 / Rev. 1.1 RE / 07.2014
ENGLISH
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berner C500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berner C500 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 12,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info