680440
39
Zoom out
Zoom in
Previous page
1/144
Next page
Display flashes 3×
Error / warning
Force limit in CLOSE direction
Possible cause
Obstruction in gate area
Remedy
Remove the obstruction; check forces, increase ifnecessary
Display flashes 4×
Error / warning
Hold or static current circuit is open, operator at a standstill
Possible cause
• Normally closed contact at terminal 12 / 13 is open
• Electric circuit interrupted
Remedy
• Close contact
• Check electric circuit
Display flashes 5×
Error / warning
Force limit in OPEN direction
Possible cause
Obstruction in gate area
Remedy
Remove the obstruction; check forces, increase ifnecessary
Display flashes 6×
Error / warning
System error
Possible cause
Internal error
Remedy
Perform a factory reset (see section10) and teach in the
control again (see section4.2), or exchange it if necessary
Display flashes 7×
Error / warning
Peak force
Possible cause
• Motor blocked
• Force cut-out has not responded
Remedy
Check the motor for seizure
10.4 Error acknowledgement
If an error occurs, this can be acknowledged, provided the
error is no longer present.
Actuate an internal or external impulse generator.
The error is deleted and the gate travels in the
corresponding direction.
11 Resetting the Control / Restoring
Factory Settings
To reset the control (taught-in end-of-travel positions,
forces):
1. Set DIL switch2 to ON.
2. Immediately press circuit board buttonP briefly.
3. When the red LED flashes rapidly, DIL switch2 must be
quickly set to OFF.
The control system has now been reset to the factory setting.
12 Dismantling and Disposal
NOTE:
When disassembling, observe the applicable regulations
regarding occupational safety.
Have a specialist dismantle the sliding gate operator in the
reverse order of these fitting instructions and dispose of it
properly.
13 Optional Accessories
Optional accessories are not included in the scope of delivery.
Loading of the operator by all electrical accessories:
max.500mA.
The following accessories, among others, are available:
• External radio receivers
• External impulse buttons (e.g. key switch)
• External code and transponder switches
• One-way photocell
• Warning lamps / warning lights
• Photocell expanders
• Universal adapter print UAP1
• HNA outdoor emergency battery
• Further accessories available on request
C300 - C800 / Rev. 1.1 RE / 07.2014 39
ENGLISH
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berner C500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berner C500 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 12,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info