673676
26
Zoom out
Zoom in
Previous page
1/38
Next page
UM - CODE N4 N5 N6 N10 - REV 0.3
6.2. Cleaning the slicing machine
6.2.1. General information
The machines must be properly cleaned at least once a day; if necessary even
more.
If the machines have not been used for a while they must be cleaned before
use as well.
6.2.2. Disassemble the machine for
cleaning
1. Disconnect the plug isolate the
machine from the electric mains
supply;
2. Turn the regulating knob of the
thickness plate to its SAFE position,
thickness plate fully closed;
3. Remove the various components as
described in the following paragraphs.
Remove the food plate
1. With the regulating knob of the
thickness plate on its SAFE position,
thickness plate fully closed (see
pag.3); pull back the plate holder
support all the way towards the
operator;
2. Turn the locking knob
counterclockwise all the way while
keeping the support at the end until
the safety device of the thickness plate
can be heard.
WARNING: To correctly carry out
this operation it could be necessary
to move the thickness regulating
knob at the same time taking it 1- 2
mm over the ’0’ position.
3. Take out the whole group by
pulling it upwards.
Removing the blade cover
1.Completely unscrew
(counterclock-wise) the tension rod
knob of the blade cover block;
2. If the blade cover is tight, loosen it
by applying pressure to the tension
rod knob.
Take out the tension rod and
remove the blade cover.
26
Removing the slice deflector
1. Remove the slice deflector.
WARNING: ensure the food presss
is down on the food plate before
lifting the food plate assembly off
the slicer
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berkel BSPT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berkel BSPT in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info