673676
20
Zoom out
Zoom in
Previous page
1/38
Next page
UM - CODE N4 N5 N6 N10 - REV 0.3
20
5. Installation
5.1. Installing the machine
Install the machine on a surface which
is level, smooth, dry and suitable for
the weight of the machine plus the
food to be sliced; refer to paragraph
3.1.
WARNING: Check that there is
nothing that can get in the way of
the plate and the food that is to be
cut on the plate.
5.2. Command description
5.2.1. Start and stop buttons
- Press the WHITE button (2) to start the
blade;
- Press the BLACK button (1) to stop
the blade moving.
1
2
5.2.2. Regulating knob for slice
thickness
The thickness of the slice is regulated
by turning the graduated scale knob (3)
counterclockwise.
Regulating field: see paragraph 3.
3
MAX. HEIGHT:
0,90 m
5.3. Electrical connection
The machine must be installed
close to an EEC regulation socket
in a system which conforms to the
regulations in force with:
- Magnetothermal protection;
- Automatic differential switch;
- Grounding system.
Before connecting, verify that the electric supply mains is suitable for the machine
by checking the technical data plate on the machine.
The slicer is fitted with a power supply cord of about 2 metres length, complete
with a plug to allow a simple disconnection from the electric mains supply.
Always indicate the presence of the power supply cord if the slicer cannot be
installed near a socket and if in the installation zone there is a transit of people.
If the power supply cord is not long enough you will require the technical
assistance service and do not proceed with a temporary electrical connection.
5.4. Checking direction of rotation
of the blade (only for machines with
three-phase motors)
1. Start the machine;
2. Check the working light is on;
3. Check the blade rotates in the
direction indicated by the arrow
(counterclockwise looking at the
machine from the side of the blade
cover);
4. If the blade goes round in the
opposite direction (clockwise) stop
the machine immediately and call a
qualified person to invert the feed
wires of the plug;
5. Check the food plate and food
press move smoothly;
6. Check the working and regulation
of the thickness plate.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berkel BSPT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berkel BSPT in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info