673667
7
Zoom out
Zoom in
Previous page
1/17
Next page
900 Series 932-933 - 7 - Date 25-03-08 UM - Code SC1 - Rev. 0.1
User Manual
2. Installation and initial operation
First read the operating instructions very carefully!
Pay attention to all notes.
Operating procedures should be carried out as described.
Always concentrate when working with this machine, this way damage to the machine and injuries can be
avoided. The installation, introduction and initial operation should bedone by an authorised supplier or
service technician.
2.1. Checking the contents of the carton
The supplied carton has to have the following contents:
BERKEL food slicer model 932 or 933
sharpening device
these operating instructions
2.2. Installation
The food slicer model 932 or 933 has to be installed on a plain, horizontal, non-slip and
stable surface. If necessary the machine should be fixed to the surface where it is being
installed
Recommended height of the working surface about 800 mm. Pay attention to the required counter space
and the working space around the machine
2.3. Electrical installation
Before the machine is connected to the electrical supply, the electrical supply should be checked against
the data on the rating plate, to ensure that it is the same specification. In case there are discrepancies
inform the supplier or technical service.
Under no circumstances plug in the machine!
The electrical supply socket-outlet should be equipped with an earth contact. It has to be connected
according to customary regulations.
A defective socket-outlet may damage the machine or endanger the operator.
The socket has to be installed at a place which can be reached easily by the operator, so that in case of
emergency the plug can be pulled out quickly. The socket must never be located under the counter or
at a place which cannot be reached easily.
In case it is necessary to exchange the plug, this should be done by an electrician or authorised after sales
service.
2.4. Checking the direction of blade rotation (for 3 phase operation only)
Switch on the machine. Push the green push button.
Signal lamp is illuminated
Check the blade rotation, it should rotate in direction of arrow
(counter clockwise) shown in the picture
If the blade rotates in wrong direction, the
positions of the poles in the plug have to be
changed by an electrician or service technician.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berkel 932 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berkel 932 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info