673667
4
Zoom out
Zoom in
Previous page
1/17
Next page
900 Series 932-933 - 4 - Date 25-03-08 UM - Code SC1 - Rev. 0.1
User Manual
This machine corresponds to legal security and hygienic requirements. Nevertheless there is a risk of
getting hurt in case of incorrect or inattentive operation or maintenance. Especially for hands or fingers
there is a risk of injury. The operating staff have to be trained carefully how to operate, clean and maintain
this machine according to these operating instructions.
Pay attention to the following notes regarding security:
See to it that unauthorised, untrained persons and in particular children cannot start,
operate or clean the machine.
It is not allowed to detach, to modify or to disregard safety protection or security
equipment. Otherwise there is a high risk of injury.
Always work with concentration, do not let yourself be distracted from your work.
Only cut food products as indicated in these operating instructions.
Never carry out experiments on or with the machine .
Never try to cut foreign material.
Never cut deep frozen products.
Never check the sharpness of the blade with your fingers.
Never detach the blade without the supplied knife remover.
Never use the machine as a place to put something on or to do other work on.
Take care that the floor space is clean, dry and non-slip.
In case the electrical power supply cable or the plug are defective, these parts have to be exchanged or
repaired only by authorised after sales service or a trained electrician.
Before cleaning always disconnect the plug from the electrical supply
If an unfamiliar noise is heard coming from the machine, switch off the machine immediately.
If a fault cannot be rectified using this instruction manual, then after sales service should be notified
1.4. General plan of the machine
1 thickness plate 10 name / data plate
2 table handle 11 star knob of fixing screw for retaining blade guard
3 adjustable product fence (bar) 12 keyboard with main switch on/off
4 end piece holder 13 pusher and end piece holder slide bar
5 table tilt release star knob 14 carriage
6 lever automatic / manual 15 thickness knob
7 carriage slide bar 16 end piece holder handle
8 blade guard (centre plate)
9 fixed knife ring
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berkel 932 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berkel 932 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info