673666
5
Zoom out
Zoom in
Previous page
1/17
Next page
900 Series 932-933 - 5 - Date 25-03-08 UM - Code SC1 - Rev. 0.1
User Manual
1.5. Dimensions of the machine and technical data
1.6 Description of the machine
This gravity feed slicer is a semi-automatic food slicer. The carriage is either moved backward and forward
automatically or the automatic drive of the carriage can be disengaged for manual operation.
The blade is driven electrically with a 1-phase or 3-phase motor. This motor is maintenance-free and air-
cooled. By means of a special air circulation the warming up of the motor is very low, especially around the
blade.
The automatic carriage is moved by a strong D.C. motor.
The food product is pushed against the blade by its own weight (gravity).
The material used in the food zone corresponds to all requirements of food hygiene.
The complete machine body, the thickness plate, the blade guard and the carriage are made of stainless
steel.
The blade is hard chromed.
All visible bearings as well as open sliding surfaces should be only lubricated with lubricant suitable for food
zones.
For switching the machine on and off a double red / blue push button with integrated signal lamp on the key
board is used . When the machine is switched on the signal lamps are illuminated.
The red main button fulfils the requirements as emergency stop switch.
The other push buttons on the key board are used for different functions for the automatic operation
(carriage speed control etc).
Model 932 933
Overall dimensions 720x790x620h mm 720x790x620h mm
Foot print 420x460 mm 420x550 mm
Max. cutting size ca. 320 x 220 (H) mm ca. 320 x 235 (H) mm
Slice thickness 0-25 mm (infinitely variable) 0-25 mm (infinitely variable)
Diameter of blade 330 mm 350 mm
Sound level < 70 db(A) < 70 db(A)
Electrical 230V 50 Hz 1 phase 230V 50 Hz 1 phase
Power 0,6 kW 0,6 kW
Weight 66 kg 66 kg
Dimensions 932 933
A mm 420 mm 420 mm
B mm 700 mm 700 mm
C mm 950 mm 950 mm
D mm 460 mm 550 mm
E mm 790 mm 790 mm
F mm 590 mm 590 mm
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berkel 900 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berkel 900 Series in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info