657619
57
Zoom out
Zoom in
Previous page
1/64
Next page
112 113
ENGLISH
ENGLISH
ROAD BIKE | OWNERS MANUAL 2016
OWNERS MANUAL 2016 | ROAD BIKE
NOTE!
I
Some components have the maximum permissible torque values printed on
them. Use a torque wrench and never exceed the maximum torque value! If
you are in doubt or if you have any questions, contact your BERGAMONT dealer.
LEGAL REQUIREMENTS FOR RIDING ON PUBLIC ROADS
If you want to use your BERGAMONT bike for riding on public roads (d), it has
to be equipped according to the regulations of the respective country.
Pay particular attention to your BERGAMONT bike being equipped with the
prescribed lighting (e) and reflectors (f).
Ask your BERGAMONT dealer to inform you about the road traffic regulations
in force in your country. Make yourself familiar with the road traffic regulations
for riding on public roads and off-road.
DANGER!
g
For your own safety, be sure to switch on the light as soon as dusk sets in.
DANGER!
g
Keep the lighting set clean and check its functioning at regular intervals.
NOTE!
i
When riding on public roads cyclists must in general observe the same
regulations as car drivers. Make yourself familiar with the road traffic regu-
lations of your country.
RECOMMENDED TORQUE SETTINGS FOR DISC BRAKES ON YOUR
BERGAMONT BIKE
Component Shimano
1
Avid
2
Tektro
3
TRP
4
Magura HS
5
(Nm) (Nm) (Nm) (Nm) (Nm)
Brake calliper mount 6 - 8 9 - 10 6 - 8 6 - 8 6
(IS adapter)
on frame/fork 8 - 10
(brake calliper)
Brake lever unit on handlebars
- Single-bolt clamp 6 - 8 Discrete 5 - 7 4
Clamp Bolt/
Hinge Clamp Bolt/
XLoc Hinge
Clamp Bolt: 5 - 6
Pinch Clamp
Bolt: 2.8 - 3.4
Split Clamp Bolts /
Match Maker
Bolts: 3 - 4
- Two-bolt clamp 4 - 5
Union screws of cable at grip 5 - 7 5 4
and normal cable at brake calliper
Brake cable connector at
brake calliper (disc tube cable) 5 - 7
Expansion tank cap 0.3 - 0.5
Bleeding device brake calliper 4 - 6 4 - 6 2 - 4 4
Bleeding device brake lever 2 - 4 4
Brake disc fixing (6-holes) 4 6.2 4 - 6 6 - 8
Brake disc fixing (Centerlock) 40 - 50
Hose (union nut) direct connection 5 - 7 4
Slave cylinder (bleeder screw) 4
Brake pad retainer at brake calliper 0.2 - 0.4 3 - 5
Cable clamp at brake calliper 4 - 6
1
www.shimano.com
2
www.sram.com
3
www.tektro.com
4
www.trpbrakes.com
5
www.magura.com
These values are reference values of the above-mentioned component manu-
facturers. Observe the values in the manuals of the component manufacturers
on this BERGAMONT info CD. These values do not apply to the components of
other manufacturers.
NOTE!
I
Due to the unmanageable number of components on the market,
BERGAMONT is not in a position to foresee every product that will be re-
placed or newly assembled by third parties. Therefore BERGAMONT denies any
liability for such kind of additions or modifications with regard to compatibility,
torque values etc. Whoever assembles or modifies the BERGAMONT bike shall
ensure that the bike was assembled according to the state of the art in science
and technology.
e fd
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont Road Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont Road Bike in the language / languages: English as an attachment in your email.

The manual is 15,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info