657619
12
Zoom out
Zoom in
Previous page
1/64
Next page
22 23
ENGLISH
ENGLISH
ROAD BIKE | OWNERS MANUAL 2016
OWNERS MANUAL 2016 | ROAD BIKE
If your seat post is equipped with a quick-release mechanism, check whether
the saddle is firmly fixed by trying to twist it relative to the frame (f).
DANGER!
G
Make sure the levers of both wheel quick-releases are always on the side
opposite to the chain. This will help you to avoid mounting the front wheel
accidentally the wrong way round. In the case of BERGAMONT bikes with disc
brakes and quick-releases having a 5-mm-axle, it may be reasonable to mount
both quick-releases with the lever on the side of the chain drive. This helps you
not to come into contact with the hot brake disc and prevents you from having
your fingers burnt. If you are in doubt or if you have any questions, contact your
BERGAMONT dealer.
DANGER!
G
Never ride your BERGAMONT bike without having checked first, whether
the wheels are securely fastened. With an insufficiently closed quick-re-
lease the wheel can come loose, thus creating a serious risk of accident!
CAUTION!
A
If your BERGAMONT road bike has thru axles, read the manuals of the
thru-axle and wheel manufacturers on this BERGAMONT info CD.
CAUTION!
A
If your BERGAMONT bike is equipped with quick-releases, be sure to lock
the frame to an immovable object together with the wheels when you leave
it outside. Anti-theft protection!
NOTE!
I
To be on the safe side you can replace the quick-releases by special locks.
They can only be opened and closed with a special, coded key or an Allen
key. If you are in doubt or if you have any questions, contact your BERGAMONT
dealer.
DANGER!
G
After wheel mounting test the brakes in stationary. You should reach the
pressure point of the brake before the brake lever reaches the handlebars.
In the case of hydraulic brakes pump them, if necessary, until you reach a pre-
cise pressure point.
DANGER!
G
Do not touch the brake disc directly after having stopped, e.g. after a long
down-hill ride, you may burn your fingers! Always let the brake disc cool
down before opening the quick-release.
Safe fastening of a component with a quick-release
Open the quick-release. You should now be able to read “Open“ (a) on the lever.
Make sure the component to be fastened is in the accurate position.
For more information see the chapters “Adjusting the BERGAMONT bike to the
rider” and “Wheels and tyres” and the manuals of the component manufactur-
ers on this BERGAMONT info CD.
Move the lever back, as if to close it. Now you should be able to read ”Close“ on
the outside of the lever. When you start closing the lever you should feel virtu-
ally no resistance with your hand until the lever is at a right angle to the frame/
fork (b).
When continuing to close the lever the resistance you feel should increase signifi-
cantly and towards the end even more strength is required to close the lever. Use
the ball of your thumb while your fingers pull on an immovable part, such as the
fork (c) or a rear stay, but not on a brake disc or spoke, to push it in all the way.
In its end position, the lever should be at a right angle to the quick-release axle
(d), i.e. it should not stand out. The lever should lie close to the frame or the fork
so that it cannot be opened accidentally. Make sure, however, that the lever is
easy to handle for actual quick use.
To check whether the lever is securely locked apply pressure to the end of
the hand lever and try to turn it while it is closed (e). If you can turn the lever
around, open it and increase the preload. Screw the tightening nut on the op-
posite side clockwise by half a turn. Close the quick-release lever and check it
again for tightness.
Finally lift the bike a few centimetres, so that the wheel no longer touches the
ground and hit the tyre from above. If it is properly fastened, the wheel will
remain firmly fixed in the drop-outs of the frame or fork without producing any
rattling.
b ca e fd
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont Road Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont Road Bike in the language / languages: English as an attachment in your email.

The manual is 15,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info