779501
80
Zoom out
Zoom in
Previous page
1/87
Next page
158 159
ENGLISH
ENGLISH
MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016 ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC
RECOMMENDED TORQUE SETTINGS FOR DISC BRAKES ON YOUR
BERGAMONT BIKE
Component Shimano
1
Avid
2
Tek tro
3
TRP
4
Magura HS
5
(Nm) (Nm) (Nm) (Nm) (Nm)
Brake calliper mount 6 - 8 9 - 10 6 - 8 6 - 8 6
on frame/fork (IS adapter)
8 - 10
(brake calliper)
Brake lever unit on handlebars
- Single-bolt clamp 6 - 8 Discrete Clamp Bolt/ 5 - 7 4
Hinge Clamp Bolt/
XLoc Hinge Clamp Bolt: 5 - 6
Pinch Clamp Bolt: 2.8 - 3.4
Split Clamp Bolts/
Match Maker Bolts: 3 - 4
- Two-bolt clamp 4 - 5
Union screws of cable 5 - 7 5 4
at grip and normal cable
at brake calliper
Brake cable connector at 5 - 7
brake calliper (disc tube cable)
Expansion tank cap 0.3 - 0.5
Bleeding device brake calliper 4 - 6 4 - 6
Bleeding device brake lever 2 - 4
Brake disc fixing 4 6.2 4 - 6 6 - 8
(6-holes)
Brake disc fixing 40
(centerlock)
Hose (union nut) direct connection 4
Slave cylinder (bleeder screw) 4
Brake pad retainer at brake calliper 3 - 5
Cable clamp at brake calliper 4 - 6
1 www.shimano.com2 www.sram.com3 www.tektro.com 4 www.trpbrakes.com
5 www.magura.com
These values are reference values of the above-mentioned component manu-
facturers. Observe the values in the manuals of the component manufacturers
on the enclosed BERGAMONT info CD. These values do not apply to the com-
ponents of other manufacturers.
NOTE!
I
Due to the unmanageable number of components on the market,
BERGAMONT is not in a position to foresee every product that will be re-
placed or newly assembled by third parties. Therefore BERGAMONT denies any
liability for such kind of additions or modifications with regard to compatibility,
torque values etc. Whoever assembles or modifies the BERGAMONT bike shall
ensure that the bike was assembled according to the state-of-the-art in science
and technology.
RECOMMENDED TORQUE SETTINGS FOR YOUR BERGAMONT
BIKE
All bolted connections of the bike components have to be tightened carefully and
checked regularly to ensure the safe and reliable operation of the BERGAMONT
bike. This is best done with a torque wrench that disengages as soon as the de-
sired torque value has been reached or a click-type torque wrench. Tighten care-
fully by approaching the prescribed maximum torque value in small steps (0.5
Nm increments) and check in between the proper fit of the component. Never
exceed the maximum torque value indicated by the manufacturer!
Where no maximum torque setting is given start with 2 Nm. Observe the indi-
cated values and observe the values on the components and/or in the manuals
of the component manufacturers on the enclosed BERGAMONT info CD.
Component Bolted connections Shimano
1
SRAM/Avid
2
Tek tro
3
TRP
4
(Nm) (Nm) (Nm) (Nm)
Rear derailleur Mount 8 - 10 8 - 10
(on frame/derailleur hanger)
Cable clamp 5 - 7 4 - 5
Pulley wheels 3 - 4
Front Mount on frame 5 - 7 5 - 7
derailleur Cable clamp 5 - 7 5
Shifter Mount on handlebars 5 2.5 - 4
Hole covering 0.3 - 0.5
Brake lever Mount on handlebars 6 - 8 5 - 7 6 - 8
unit
Hub Quick-release lever 5 - 7.5
Lock nut for bearing adjustment
Of quick-release hubs 10 - 25
Sprocket cluster lock ring 29 - 49 40
Internal Hub axle nut 30 - 45
gear hub
Crank Crank mount (grease-free square-head) 35 - 50
Crank mount (Shimano Octalink) 35 - 50
Crank mount
(Shimano Hollowtech II) 12 - 15
Crank mount (Isis) 31 - 34
Crank mount (Giga X Pipe) 48 - 54
Chainwheel mount 8 - 11 12 - 14 (steel)
8 - 9 (alu)
Sealed Shell (square-head) 49 - 69
cartridge Shell (Shimano Hollowtech II, 35 - 50
bearing SRAM Giga X Pipe) 34 - 41
Shimano Octalink 50 - 70
Pedal Pedal axle 35
Shoe Cleat 5 - 6
Spike 4
Brake Cable clamp 6 - 8 6 - 8 6 - 8 6 - 8
(V-brake) Brake shoe mount 6 - 8 6 - 8 6 - 8 6 - 8
Brake pad fixing 1 - 2
Brake boss frame/fork 8 - 10
1 www.shimano.com2 www.sram.com3 www.tektro.com 4 www.trpbrakes.com
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont Pedelec 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont Pedelec 2016 in the language / languages: English as an attachment in your email.

The manual is 21.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info