779501
62
Zoom out
Zoom in
Previous page
1/87
Next page
122 123
MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016 ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC
b ca e fd
ENGLISH
ENGLISH
Release the clamping bolt(s) located on the side of the stem by one to two com-
plete turns (c). Gently tighten the countersunk adjusting bolt on top a little, e.g.
by a quarter turn (d), by using an Allen key.
Realign the stem to ensure that the handlebars are at right angle to the wheel.
Make sure the front wheel is in line with the top tube and the stem. Tighten
the clamping bolts of the stem. Use a torque wrench and never exceed the
maximum torque values! You will find the prescribed values in the chapter
Recommended torque settings for your BERGAMONT bike”, directly on the
components and/or in the manuals of the component manufacturers on this
BERGAMONT info CD. Check the headset for play as described above (a). Do
not overtighten the headset. Risk of headset failure.
DANGER!
G
Bear in mind that by overtightening the bolts the stem can crush the steer-
er tube. In particular forks with carbon steerer tubes are highly sensitive to
overtightening the steerer tube clamping at the stem. Risk of breakage! Make
sure the clamping area is absolutely free of grease when any of the clamping
faces is made of carbon. If necessary, use carbon assembly paste in the clamp-
ing areas to ensure maximum clamping.
DANGER!
G
Check the secure seat of the stem by taking the front wheel between your
legs and trying to turn the handlebars and stem relative to the wheel (e). A
loose stem can cause an accident.
DANGER!
G
Never change the preloading mechanism in the inside of the fork steerer
tube. Never install a star nut in carbon fork steerer tubes (f).
CAUTION!
A
Do not overtighten the upper bolt, it only serves to adjust the headset play.
NOTE!
I
If you do not succeed in adjusting the headset, this can have several rea-
sons. If you are not absolutely sure, ask your BERGAMONT dealer for help.
DANGER!
G
Riding the bicycle with a loose headset increases the stress on fork and
bearings. This can lead to damage to the fork. Risk of falling!
Checking and readjusting
Check the headset for play by placing your fingers around the upper headset
cup (a). Bring your weight to bear on the saddle, pull the front brakes with your
other hand and push the BERGAMONT bike firmly back and forth with the
wheel remaining on the ground. If the bearing has play, you will feel the upper
head tube race moving in jerks relative to the lower head tube race - visible as a
small gap in between the head tube races.
To check whether the headset runs smoothly, lift the frame up until the front
wheel no longer touches the ground. The handlebars should turn from far left to
far right without feeling roughness or tightness at any point. With a gentle tap
on the handlebars (b) the fork should turn easily from the middle position.
If you face any problems during the test, contact your BERGAMONT dealer.
DANGER!
G
Adjusting the headset requires a certain amount of experience and should
therefore be left to your BERGAMONT dealer.
THREADLESS HEADSET – AHEADSET®
The distinct feature of this system is that the stem does not sit within the fork
steerer tube, but rather slips over the fork steerer tube, which in this case is
threadless. The stem is thus an important part of the headset, as the stem
clamping fixes the adjustment. You generally only need one or two Allen keys
and a torque wrench to adjust an Aheadset®.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont Pedelec 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont Pedelec 2016 in the language / languages: English as an attachment in your email.

The manual is 21.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info