779501
52
Zoom out
Zoom in
Previous page
1/87
Next page
102 103
MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016 ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC
b ca e fd
ENGLISH
ENGLISH
WHEELS AND TYRES
The wheel consists of the hub, the spokes and the rim. The tyre is mounted onto
the rim so that it encases the tube in the case of the most common system, i.e.
the clincher or folding tyres. There is a rim tape running around the rim well
(e) to protect the sensitive tube against the edges of the rim trough, which are
often sharp.
Another common system comprises tubeless tyres which require specific rims
without boreholes and firmly screwed valves. Another system comprises in rare
cases tubular tyres which are glued on specific rims.
The wheels are subjected to considerable stress through the weight of the rider
and any carried luggage as well as through bumpy road surfaces and terrain.
Although wheels are manufactured with great care and delivered accurately
trued, spokes and nipples can lose a little tension on the first kilometres. Ask
your BERGAMONT dealer to check and true up the wheels after you have bed-
ded them in over about 100 to 300 kilometres or 5 to 15 hours of use.
After the bedding-in period, check the wheels regularly. It will, however, rarely
be necessary to retighten the spokes (f).
DANGER!
G
Poorly glued tubular tyres may come off the rim. Risk of accident!
CAUTION!
A
Truing (retruing) wheels is a difficult job which you should definitely leave
to your BERGAMONT dealer.
NOTE!
I
Tubular tyres will not be considered any further in the following. Read the
manuals of the rim manufacturer, the tyre producer on this BERGAMONT
info CD and ask your BERGAMONT dealer for advice.
CHAIN MAINTENANCE
Although the chain is one of the wearing components of your BERGAMONT
bike, there are still ways for you to prolong its life. Make sure the chain is lubri-
cated regularly, especially after riding in the rain. Try to only use gears which run
the chain in the straightest line (a+b) between the sprockets and chainrings and
get into the habit of high cadence pedalling.
Chains on mountain bikes with derailleur gears are worn out after approx. 800
to 2,000 km or 50 to 125 hours of use. Heavily stretched chains impair the
operation of derailleur gears. Cycling with a worn-out chain also accelerates the
wear of the sprockets and chainrings. Replacing these components is relatively
expensive compared with the costs of a new chain. It is therefore advisable to
check the condition of the chain at regular intervals.
Your BERGAMONT dealer has accurate measuring instruments to check the
chain wear (c). Replacing the chain should ideally be left to an expert, as this
requires special tools. In addition, you need to select a chain matching your gear
system.
DANGER!
G
An improperly joined or heavily worn chain can break and cause an acci-
dent.
NOTE!
I
When replacing your chain, only use appropriate and suitable original spare
parts (d). Your BERGAMONT dealer will be pleased to help you.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont Pedelec 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont Pedelec 2016 in the language / languages: English as an attachment in your email.

The manual is 21.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info