779501

Bergamont Pedelec 2016 Manual

37
Zoom out
Zoom in
Previous page
1/87
Next page
72 73
MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016 ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC
b ca ed
ENGLISH
ENGLISH
CAUTION!
A
Do not ride your bicycle, if the suspension fork bottoms out. This could
damage the suspension fork itself as well as the frame. The spring rate
should always be adjusted to the weight of the rider and the luggage as well as
to the riding conditions.
NOTE!
I
In case of inquiries, contact your BERGAMONT dealer or follow the respec-
tive instructions in the manual of the suspension fork manufacturer on this
BERGAMONT info CD.
Lockout
When taking long uphill rides involving hard pedalling out of the saddle, a
suspension fork is typically bobbing. It is advisable to lock the damping, if the
suspension fork has a lockout mechanism (d+e). For downhill rides on uneven
ground the lockout mechanism must be open stringently.
Many BERGAMONT hardtail bikes have a lockout lever at the handlebars.
A weaker damping ensures a good responsive performance, leads however to
an excessive compression of the suspension fork when riding at high speed over
obstacles, e.g. steps, or to a bouncing when riding out of the saddle under cer-
tain conditions. A too strong damping hardens the suspension and thus reduces
the riding comfort.
If you have set the sag correctly, as above described, and the fork works prop-
erly during a normal test ride, but bottoms out in an extreme situation, you can
increase the compression damping.
Proceed click by click as a too strong compression damping prevents the
suspension fork from using the complete suspension travel. The setting of the
compression damping (a) can be a long process which has to be carried out
consciously and always in small steps.
Start with the lowest step, i.e. the adjusting knob must be turned fully towards
the marking “-” (b).
Always check a changed adjustment during a test ride in the terrain.
If you do not trust the setting of the damping or if problems occur with it,
contact your BERGAMONT dealer or follow the corresponding instructions in
the manual of the suspension fork manufacturer, which you can find on this
BERGAMONT info CD.
DANGER!
G
Do not turn any screws by using tools in the vague hope of adjusting them
somehow. You could be loosening the fastening mechanism, thus provoking
an accident. Normally, the adjustment devices are operated with the fingers and
are marked by all manufacturers with a scale or with “+” (for stronger damping/
harder suspension) and “-” signs (c).
DANGER!
G
A too strong damping (rebound damping) of the fork can result in the fact
that the fork no longer extends when riding over a quick series of obstacles.
Risk of falling!
DANGER!
G
When mounting a new front tyre, make sure there is enough clearance
between tyre and fork crown as the fork compresses entirely. If necessary,
deflate the suspension fork completely and press the handlebars forcefully
downward to check this. The front wheel can get jammed. Risk of falling!
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont Pedelec 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont Pedelec 2016 in the language / languages: English as an attachment in your email.

The manual is 21.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info