779501

Bergamont Pedelec 2016 Manual

31
Zoom out
Zoom in
Previous page
1/87
Next page
60 61
MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016 ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC
b ca e fd
ENGLISH
ENGLISH
Tighten the bolts evenly and in a cross pattern, i.e. alternately and gradually, to
the lower value of the recommended torque values using a torque wrench.
Once clamped in the stem try rotating the handlebars and tighten the bolt a
little more, if necessary. Use a torque wrench and never exceed the maximum
torque values! You find them directly on the components and/or in the manuals
of the component manufacturers on this BERGAMONT info CD. If the handle-
bars are not tight with the prescribed torque value, use carbon assembly paste.
After adjusting the handlebars you need to adjust the brake lever/shifter units.
Release the Allen bolt at either unit. Turn the levers relative to the handlebars.
Sit in the saddle and place your fingers on the brake levers.
Check whether the back of your hand forms a straight line with the line of your
forearm (f). Retighten the units with a torque wrench and do a twist test! The
brake levers need not be absolutely tight. In case of a fall it is an advantage
when the brake levers can be turned.
DANGER!
G
Tighten the bolts at the stem until the clamping slots between the stem
body and the faceplate are parallel and identical in width at the top and at
the bottom. Tighten the bolts evenly and in a cross pattern, i.e. alternately and
gradually, to the lower value of the recommended torque values using a torque
wrench.
DANGER!
G
Note that the bolted connections of the stem, handlebars, bar ends
and brakes have to be turned to their prescribed torque values. Use a
torque wrench and never exceed the maximum torque values! You will find
the prescribed values in the chapter “Recommended torque settings for your
BERGAMONT bike”, directly on the components and/or in the manuals of the
component manufacturers on this BERGAMONT info CD.
Hydraulic brakes are also fitted with adjusting devices at the brake lever (a).
There are different systems. Ask your BERGAMONT dealer for advice or read
the manuals of the component manufacturers on this BERGAMONT info CD.
When adjusting the lever reach, make sure the first phalanx of the index finger
reaches around the brake lever (b). Check the proper adjustment and function-
ing of the brake system subsequently, as described in the chapter “Brakes” and
in the manuals of the component manufacturers on this BERGAMONT info CD.
DANGER!
G
Make sure your child cannot pull the brake levers all the way to the handle-
bars. Your maximum braking force must be reached short of this point.
NOTE!
I
In the case of hydraulic brakes and disc brakes follow the manual of the
brake manufacturer, which you can find on this BERGAMONT info CD. If you
are in doubt or if you have any questions, contact your BERGAMONT dealer.
Adjustment of handlebar tilt and brake levers on BERGAMONT
mountain bikes
The handlebars are usually slightly bent at the ends. Set the handlebars to a
position in which your wrists are relaxed and not turned outwards too much (c).
Release the Allen bolt(s) at the bottom or front side of the stem.
Turn the handlebars to the desired position.
Make sure the handlebars are accurately centred in the stem (d). Carefully
retighten the bolt(s) with the torque wrench. Make sure the upper and lower
clamping slots of the stem are parallel and identical in width (e).
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont Pedelec 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont Pedelec 2016 in the language / languages: English as an attachment in your email.

The manual is 21.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info