657620
24
Zoom out
Zoom in
Previous page
1/87
Next page
46 47
MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016
ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC
b ca e fd
ENGLISH
ENGLISH
NOTE!
I
The seating position depends highly on how you want to use the
BERGAMONT bike. Ask your BERGAMONT dealer or your trainer for help.
The advice given below is suitable for typical BERGAMONT cross-country/mar-
athon bikes.
NOTE!
I
If sitting on the saddle causes you trouble, e.g. because it numbs your
crotch, this may be due to the saddle. Your BERGAMONT dealer has a very
wide range of saddles available and will be pleased to advise you.
ADJUSTMENT OF THE SADDLE TO THE CORRECT HEIGHT
The correct saddle height depends on the length of your legs. When pedal-
ling, the ball of your foot should be positioned above the centre of the pedal
axle. With your feet in this position you should not be able to stretch your legs
completely straight at the lowest point, otherwise your pedalling will become
awkward (c).
Check the height of your saddle with flat-soled shoes. This is best done with
suitable cycling shoes.
Sit on the saddle and put your heel on the pedal at its lowest point. Your leg
should be fully stretched and your hips should remain horizontal.
To adjust the saddle height loosen the quick-release lever (e) (see the chapter
Using quick-releases and thru axles”) or the binder bolt of the seat post clamp
at the top of the seat tube. The latter requires suitable tools, e.g. an Allen key,
with which you turn the bolt two to three turns anticlockwise. Now you can per-
form the vertical adjustment of the seat post.
Be sure not to pull out the seat post too far – the mark on the seat post (f) (end,
max., min., stop or the like) should always remain within the seat tube – and al-
ways grease the part of an aluminium or titanium seat post that is inserted into a
seat tube made of aluminium, titanium or steel. Do not grease carbon seat posts
and/or carbon seat tubes in the clamping area! Use special carbon assembly
paste instead, if the seat post remains permanently in its position, i.e. if its posi-
tion is not changed during the ride.
ADJUSTING THE BERGAMONT BIKE TO THE RIDER
Your body height and proportions are decisive for the frame size of your
BERGAMONT bike. Make particularly sure there is enough space between your
crotch and the top tube so that you do not hurt yourself, if you have to get off
your bike quickly (a).
By choosing a specific type of bicycle you roughly determine the posture you
will be riding in (b. However, some components of your BERGAMONT bike are
especially designed so that you can adjust them to your body proportions up to
a certain degree (c). This includes the seat post, the handlebars and the stem as
well as the brake levers.
As all works require know-how, experience, suitable tools and skills, you should
restrict yourself to adjusting your seating position. Contact your BERGAMONT
dealer, if you are not happy with your seating position or if you want some-
thing changed. They will see to your wishes the next time you leave your
BERGAMONT bike at the workshop, e.g. for the first inspection.
After any adjustment/assembly work, be sure to make a short functional check
as described in the chapter “Tests before every ride” and do a test ride on your
BERGAMONT bike in an area free of traffic.
DANGER!
G
If you have a very small frame, there may be the danger of your foot col-
liding with the front wheel. Therefore, make sure your cleats are properly
adjusted.
DANGER!
G
All tasks described in the following require the know-how of a mechanic
and appropriate tools. Make it a rule to tighten the bolted connections al-
ways with greatest attention (d). Increase the torque values bit by bit and check
the fit of the component in between. Use a torque wrench and never exceed
the maximum torque values! You will find the prescribed values in the chapter
Recommended torque settings for your BERGAMONT bike”, directly on the
components and/or in the manuals of the component manufacturers on this
BERGAMONT info CD.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont MTB - Pedelec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont MTB - Pedelec in the language / languages: English as an attachment in your email.

The manual is 21,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bergamont MTB - Pedelec

Bergamont MTB - Pedelec User Manual - German - 89 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info