779517

Bergamont CITY - 2019 Manual

22
Zoom out
Zoom in
Previous page
1/79
Next page
ENGLISHENGLISH TREKKING AND TREKKING‑PEDELEC | ORIGINAL OPERATING INSTRUCTIONSORIGINAL OPERATING INSTRUCTIONS | TREKKING AND TREKKING‑PEDELEC
b ca e fd
If you want to turn the stem around, you have to also release the bolts of the faceplate
securing the handlebars (d). If the stem is fitted with a cap, you can simply take
out the handlebars at this point. If it is not fitted with a cap, you have to remove the
handlebar fittings.
Mount the handlebars and, if necessary, the handlebar fittings, as described in the
chapter “Adjustment of handlebar tilt and brake levers” and/or in the manuals of the
component manufacturers.
Check after the adjustment or assembly, whether the handlebars are firmly seated
in the stem by trying to rotate the handlebars downwards (e). Verify whether the
handlebar/stem-combination can be turned relative to the fork. Do this by taking
the front wheel between your knees and trying to twist the handlebars. If there
is movement, carefully tighten the bolts a little more by using the torque wrench,
observe the maximum torque value and check again the proper fit (f).
Tighten carefully by approaching the prescribed maximum torque value in small steps
(0.5 Nm increments) and check in between the proper fit of the component. Never
exceed the maximum torque value indicated by BERGAMONT!
Ask your BERGAMONT dealer to explain you both function and adjustment of your
stem or, still better, let him do that work.
DANGER!
G
In the case of turned stems, it is possible that the cables are too short. In this case
riding can be unsafe. If in doubt, ask your BERGAMONT dealer.
DANGER!
G
When removing spacers the fork steerer tube must be shortened. This change is
irreversible. The shortening should be carried out by your BERGAMONT dealer, but
only after you have found your preferred position.
CAUTION!
A
Keep in mind that readjusting the position of the stem changes the position of
handlebars, brake levers and shifters. Readjust these components, as described in
the chapter “Adjustment of handlebar tilt and brake levers“.
DANGER!
G
Note that the bolted connections of adjustable stems and handlebars have to
be tightened to the specified torques. Otherwise the handlebars or stem may
come loose or break. Use a torque wrench and observe the minimum and maximum
torque values! You will find the prescribed values in the chapter “Recommended torque
settings for your BERGAMONT bike”, directly on the components and/or in the manuals
of the component manufacturers.
CAUTION!
A
Keep in mind that readjusting the position of the stem changes the position of
handlebars, brake levers and shifters. Readjust these components, as described in
the chapter “Adjustment of handlebar tilt and brake levers“.
Stems for threadless systems – Aheadset®
In the case of BERGAMONT bikes with Aheadset® headsets the stem also serves
to adjust the bearing preload. If you change the position of the stem, you have to
readjust the bearing play (see the chapter “The headset on the BERGAMONT bike”
and the manuals of the component manufacturers).
The vertical setting range is determined by the intermediate rings, also referred to
as spacers (a). In the case of flip-flop stem models (b) the stem can be mounted the
other way round to achieve a different handlebar height.
For modifications unscrew the bolt at the top of the fork steerer tube which serves to
adjust the initial bearing pressure, remove the Ahead cap (c) and release the bolts on
either side of the stem by up to three turns. Remove stem and spacers from the fork
steerer tube. In doing so keep hold of both frame and fork to prevent the fork from
slipping off the head tube.
You can determine the handlebar height by the arrangement of stem and spacers.
Slip the remaining spacers onto the fork steerer tube above the stem. Adjust the
headset, as described in the chapter “The headset on the BERGAMONT bike“.
| 4 2 4 3 |
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont CITY - 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont CITY - 2019 in the language / languages: English as an attachment in your email.

The manual is 6.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bergamont CITY - 2019

Bergamont CITY - 2019 User Manual - German - 81 pages

Bergamont CITY - 2019 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info