779516
16
Zoom out
Zoom in
Previous page
1/23
Next page
b ca e fd
| 30 31 |
ENGLISHENGLISH GENERAL MANUAL | OWNER’S MANUALOWNER’S MANUAL | GENERAL MANUAL
Realign the components, if necessary, and gently tighten the bolts to ensure a reliable
clamping of the components (b). The maximum torque values are printed directly on
the components or specified in the manuals of the component manufacturers.
For more information see the chapters “Adjusting the BERGAMONT bike to the
rider” and “Headset” in this BERGAMONT general manual as well as in your detailed
BERGAMONT owner’s manual. For additional information on your bicycle and the
web links for the component manufacturers, please visit the manual pages of the
bike brand you have purchased via your Quick Start Manual.
3. Check whether the chain still runs on the chainrings and the sprockets. If your
BERGAMONT bike fell over to the chain side, verify the proper functioning of the
gears. Ask somebody to lift your BERGAMONT bike by the saddle and carefully shift
through all the gears. Pay particular attention when switching to the small gears,
making sure the rear derailleur does not get too close to the spokes as the chain
climbs onto the larger sprockets (c+d).
If the rear derailleur or the drop-outs/derailleur hanger is bent, the rear derailleur
may collide with the spokes. This in turn can destroy the rear derailleur, the rear
wheel or the frame. Check the function of the front derailleur, as a displaced front
derailleur can throw off the chain, thus interrupting the drive of your BERGAMONT
bike. Risk of falling!
For more information see the chapter “Gears” in your detailed BERGAMONT
owner’s manual. For additional information on your bicycle and the web links for the
component manufacturers, please visit the manual pages of the bike brand you have
purchased via your Quick Start Manual.
4. Make sure the saddle is not out of alignment using the top tube (e) or the bottom
bracket shell as a reference. If necessary, open the clamping, realign the saddle
and retighten the clamping.
For more information see the chapters “Adjusting the BERGAMONT bike to the rider”
and “Using quick-releases and thru axles” in this BERGAMONT general manual as
well as in your detailed owner’s manual. For additional information on your bicycle
and the web links for the component manufacturers, please visit the manual pages of
the bike brand you have purchased via your Quick Start Manual.
5. Let your BERGAMONT bike bounce on the ground from a small height (f). If there is
any rattling, see where it comes from. Check the bearings and bolted connections, if
necessary. Tighten them slightly, if necessary.
WARNING: Ensure that the braking surfaces and brake pads are absolutely free
of wax, grease and oil. Risk of accident!
CAUTION: When replacing any parts, be sure to only use parts that bear
the appropriate mark and, to be on the safe side, original spare parts. For more
information see the chapter “Brakes” in this general manual. For additional information
on your bicycle and the web links for the component manufacturers, please visit the
manual pages of the bike brand you have purchased via your Quick Start Manual. Your
BERGAMONT dealer will be pleased to help you.
CAUTION: Read in any case the chapter “Brakes” in your detailed BERGAMONT
owner’s manual before you start to readjust or to service the brake or before doing
any work whatsoever. For additional information on your bicycle and the web links
for the component manufacturers, please visit the manual pages of the bike brand
you have purchased via your Quick Start Manual.
TESTS AFTER AN ACCIDENT
1. Check whether the wheels are still firmly fixed in the drop-outs (a) and whether the rims are
still centred with respect to the frame or fork. Spin the wheels and observe the gap either
between brake pads and rim sides or between frame and tyre. If you have rim brakes and
the width of the gap changes markedly and you have no way to true the rim where you are,
you need to open the brakes a little with the special device so that the rim can run between
the brake pads without touching them. Please note that in this case the brakes may not act
as powerfully as you are used to. No matter whether you have rim or disc brakes, have the
wheels trued by your BERGAMONT dealer immediately after you are back home.
For more information see the chapters “Brakes”, “Using quick-releases and thru
axles” and “Wheels and tyres” in this BERGAMONT general manual as well as in
your detailed BERGAMONT owner’s manual. For additional information on your
bicycle and the web links for the component manufacturers, please visit the manual
pages of the bike brand you have purchased via your Quick Start Manual.
2. Check that handlebars and stem are neither turned nor bent nor broken and that
they are level and upright. Check whether the stem is firmly fixed in the fork by trying
to turn the handlebars relative to the front wheel. Briefly lean on the brake levers to
make sure the handlebars are firmly fixed in the stem.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont 2019 in the language / languages: English as an attachment in your email.

The manual is 1.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bergamont 2019

Bergamont 2019 User Manual - German - 23 pages

Bergamont 2019 User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info