784242
19
Zoom out
Zoom in
Previous page
1/32
Next page
19
Installation
6005739_a – 31.05.2022
EN
3.5.9 Establishing the electrical power supply
Observe the voltage specifications on the ratings plate.
Plug the connecting cable mains plug into the socket.
Plug the other end of the connecting cable into the
device.
Route the cable such that it is not kinked, crushed or
damaged and so that it will not get in the way when
replacing the filter filling.
Make sure that the device can be disconnected on all
poles from the electricity supply after installation.
The device is ready for operation.
3.5.10 Check and carry out commissioning
DATTENTION!
Risk of disruptions due to moisture in the device!
If the device is moved from a cold environment into a hot
one, condensation may form inside.
Wait about 2-3 hours before bringing the device into
service.
Remove the protective film from the device.
Check that the mains plug is freely accessible or that
an all-pole isolating device (min. 3 mm contact gap) is
present.
Check that the mains cable and the electrical connection
cable are not kinked, crushed or damaged.
Make sure that the protective film is removed.
Ensure that air outlets are not closed or covered.
With devices for recirculated air mode or hybrid mode:
Make sure that the ventilation slots are free.
Make sure that the recirculated air or hybrid filter is
accessible at all times.
Check the correct functioning of the device.
D“4. Operation (page 20).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BLB 90 FL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BLB 90 FL in the language / languages: English as an attachment in your email.

The manual is 8.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BLB 90 FL

Berbel BLB 90 FL User Manual - German - 32 pages

Berbel BLB 90 FL User Manual - Dutch - 32 pages

Berbel BLB 90 FL User Manual - French - 32 pages

Berbel BLB 90 FL User Manual - Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info