784183
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
Operation
6004847_b – 03.06.2022
4.2.6 Effect lighting
The effect lighting is dimmable and is equipped with energy-
saving LEDs. The lighting can be used independently of the
fan. It can be switched on when the device is on.
It can be switched off at any time.
Button Function
Dimmer.
Press the button once to switch the effect
lighting on or off.
Hold the button (more than 1 second)
to start the dimmer. After releasing the
button, the effect lighting remains at the
selected brightness.
After switching off, the effect lighting starts
with full brightness the next time it is
switched on.
4.2.7 Run-on function
The device comes with a run-on function. When the function
is used, the device continues to work 10 minutes after being
switched off.
In recirculated air mode, it is necessary to use the run-on
function so that the device can remove the remaining
odours. Using the run-on function increases the life of the
filter filling. The filter filling must be replaced at regular
intervals.
The run-on function can be switched on manually or
automatically. The device is delivered with the automatic run-
on function active, and settings are made in configuration
mode.
D“4.3 Configuring the device” (page 25).
Button Function
The device is switched on.
If the automatic run-on function is activated:
Touch the button one time.
yThe device switches off.
yThe run-on time (10 minutes) starts
automatically in power level 1.
yThe button for power level 1 goes on.
yThe run-on function button flashes.
yIt is possible to switch between the power
levels.
If the button is touched again, the device
shuts off completely.
Button Function
The device is switched on, and any power
level is selected.
Touch the button one time.
yThe run-on time (10 minutes) starts in the
selected power level.
yThe button for the active power level lights
up.
yThe run-on function button flashes.
yIt is possible to switch between the power
levels.
If the button is touched again, the run-on
function stops.
4.2.8 AutoRun
Devices equipped with the AutoRun module start
automatically when the cooktop is turned on. When the
cooktop is turned off, the device switches to run-on function
and then switches off.
The AutoRun automation is set in configuration mode.
D“4.3 Configuring the device” (page 25).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BKH 90 EG-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BKH 90 EG-2 in the language / languages: English as an attachment in your email.

The manual is 8.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BKH 90 EG-2

Berbel BKH 90 EG-2 User Manual - German - 36 pages

Berbel BKH 90 EG-2 User Manual - Dutch - 36 pages

Berbel BKH 90 EG-2 User Manual - French - 36 pages

Berbel BKH 90 EG-2 User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info