784191
17
Zoom out
Zoom in
Previous page
1/24
Next page
17
Operation
6006262_0 – 03.06.2022
EN
Button Function
Manual
The device is switched on, and any power
level is selected.
Press button 1x.
yThe run-on time starts in the selected power
level and switches off after 10 minutes.
If the power level POWER is selected, the
device automatically switches back to
power level 3 after 6 minutes.
yThe button for the active power level
flashes.
If the button is pressed again, the run-on
function stops.
Automatic or manual setting
The device is turned off.
Press and hold the button for longer than
10 seconds.
yAll buttons flash.
Press the button at the same time.
yThe automatic run-on function is activated
when the button is constantly illuminated.
yThe manual run-on function is activated
when the button is not illuminated.
4.2.3 Hob lighting
The hob lighting is fitted with energy-saving LED lighting.
The lighting can be used at any time and independently of
the fan.
Switch illumination on/off
Button Function
Press button 1x, in order to switch the hob
lighting on or off.
Dimming the lighting
Button Function
Press and hold the button to start
dimming the lighting.
Release the button once the desired
brightness is reached.
When the lighting is switched off and on
again, the brightness returns to 100%.
4.2.4 AutoRun
Devices equipped with the AutoRun module start
automatically when the cooktop is turned on. When the
cooktop is turned off, the device switches to run-on function
and then switches off.
Button Function
Setting automatic AutoRun
The device is turned off.
Press and hold the button for longer than
10 seconds.
yAll buttons flash.
Press the button at the same time.
yThe automatic AutoRun function is
activated when the button is constantly
illuminated.
yThe automatic AutoRun function is
deactivated when the button is not
illuminated.
4.2.5 Filter filling indicator
The device has a control indicator to remind the operator
to change the filter filling. If no air circulation filter is used,
the control indicator has no meaning.
The control indicator flashes every 1,000 fan operating hours.
The hours counter is started anew by switching off the
control indicator.
Button Function
After switching off, the button flashes for
2 minutes:
The filter filling must be replaced.
D“6.2.2 Replacing filter filling” (page 20).
When the filter filling has been changed:
Press the button (> 1 second).
The hour counter restarts, and the flashing
indicator turns off.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BKH 80 ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BKH 80 ST in the language / languages: English as an attachment in your email.

The manual is 4.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BKH 80 ST

Berbel BKH 80 ST User Manual - German - 24 pages

Berbel BKH 80 ST User Manual - Dutch - 24 pages

Berbel BKH 80 ST User Manual - French - 24 pages

Berbel BKH 80 ST User Manual - Italian - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info