784179
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
Installation
6005049_0 – 21.11.2019
3.5 Installation procedure
Short overview:
1. Preparation for installation
2. Unpack the device
3. Removing the lower section, bulging edge and
Capillar Trap
4. Hang the device in place
5. Connect accessories
6. Fit the BackFlow port
7. Install filter (with recirculating and hybrid operation)
8. Connect exhaust air ducting (with exhausted air and
hybrid mode)
9. Establish electrical power supply
10. Mount the chimney
11. Insert the Capillar Trap, bulging edge and lower section
12. Check and carry out commissioning
3.5.1 Preparation for installation
Familiarise yourself with the installation situation and the
associated documents.
yDevice and instructions.
yAccessories.
yInstallation location.
yIntended operating mode.
Assemble the tools and materials required:
yStable stepladder
yFolding rule or measuring tape
yPencil
ySpirit level
ySlotted screwdriver SL 2.5 x 0.4
yTorx screwdriver TX30
yØ 8 mm masonry bit
yHammer drill
y10 mm spanner
yCutter blade
yProtective material (e.g. thick cardboard) for the hob
and the worktops
Keep the installation area free of objects that could be in
the way or that could be damaged.
Make sure that the hob and other parts that could be
touched have cooled down.
Protect the hob and other surfaces in the installation area
(e.g. with thick cardboard).
Ensure that the power supply is switched off and remains
so. Connect the power supply only when instructed to do
so in the installation instructions.
If accessories (e.g. wall box, window contact switch) are
required for the installation:
Observe the instructions for the accessories.
Ensure that the accessories are correctly installed and
ready for connection.
Ensure that the connection cables from accessories are
correctly routed and accessible.
3.5.2 Unpack the device
DATTENTION!
Hazard of glass breaking or other damage due to
incorrect handling!
The device and its surfaces can be damaged when being
unpacked or transported.
Do not cut into the protective cardboard packaging.
Keep objects that could scratch the device far away from
it (e.g. tools, belt buckles).
Unpack the device and all accompanying parts carefully.
Place the device on its back on a firm, clean and
protective surface (e.g. thick cardboard).
Check the device and its constituent parts for damage.
Check the delivery is complete.
D“2.4 Scope of delivery” (page 7).
If parts are missing or damaged:
Please consult your dealer or customer services.
Remove the packaging material.
D“8.1 Dispose of packaging (page 29).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BKH 110 GL-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BKH 110 GL-2 in the language / languages: English as an attachment in your email.

The manual is 8.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BKH 110 GL-2

Berbel BKH 110 GL-2 User Manual - German - 32 pages

Berbel BKH 110 GL-2 User Manual - Dutch - 32 pages

Berbel BKH 110 GL-2 User Manual - Dutch - 32 pages

Berbel BKH 110 GL-2 User Manual - French - 32 pages

Berbel BKH 110 GL-2 User Manual - Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info