784184
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
Operation
6004847_b – 03.06.2022
EN
4.2.2 Extraction mode / recirculated air mode
changeover
If the device is configured for hybrid mode, it is possible to
switch between extraction mode and recirculated air mode
at any time after activating the changeover function.
The changeover function is activated in configuration mode.
D“4.3 Configuring the device” (page 25).
Button Function
If the changeover function is activated:
Touch the button one time.
Button glows dimly:
yThe device operates in extraction mode.
yThe wall box is opened.
yThe cleaned air is discharged outdoors.
Button glows brightly:
yThe device is operating in recirculated air
mode.
yThe wall box is closed.
yThe cleaned air is discharged into the
room.
4.2.3 Filter filling indicator
The device has a control indicator to remind the operator
to change the filter filling. If no air circulation filter is used,
the control indicator has no meaning.
The function is set so that the button flashes every 1,000 fan
operating hours (flash duration 120 seconds) as soon as
the device is turned off. The hours counter is restarted by
switching off the control indicator.
Button Function
Button flashes:
The filter filling must be replaced.
D“6.2.2 Replacing filter filling (with
recirculating and hybrid mode)”
(page 28).
Hold the button (> 1 second) to restart the
hours counter.
4.2.4 Window contact switch
If a window contact switch is connected to the device, this
monitors whether the corresponding window is open or
closed. Extraction only takes place with an open window or
in recirculated air mode.
Button Function
Button flashes:
yA window contact switch is connected to
the device.
yThe window is closed.
yThe device does not perform extraction.
Open the window.
yExtraction can be used.
4.2.5 Cooktop lighting
The cooktop lighting is dimmable and is equipped with
energy-saving LEDs. The lighting can be used independently
of the fan. It can be switched on when the device is on.
It can be switched off at any time.
The colour temperature can be changed.
Button Function
Dimmer.
Press the button once to switch the
cooktop lighting on or off.
Hold the button (more than 1 second)
to start the dimmer. After releasing the
button, the cooktop lighting remains at
the selected brightness.
After switching off, the cooktop lighting
starts with full brightness the next time it is
switched on.
Colour temperature.
Touch the button 1x.
Touch and hold the button again within
half a second to start the colour cycle.
The cooktop lighting switches on, the colour
cycle starts.
Release the button when the desired
colour temperature is reached.
The colour cycle stops, and the selected
colour temperature is saved.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BKH 110 EG-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BKH 110 EG-2 in the language / languages: English as an attachment in your email.

The manual is 8.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BKH 110 EG-2

Berbel BKH 110 EG-2 User Manual - German - 36 pages

Berbel BKH 110 EG-2 User Manual - Dutch - 36 pages

Berbel BKH 110 EG-2 User Manual - French - 36 pages

Berbel BKH 110 EG-2 User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info