784247
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
Operation
6006113_a – 01.06.2022
EN
4.6 Connecting the device to the extractor hood
The connection is possible for the following hoods:
yExtractor hoods with „Berbel Connect 2.0“ accessories.
yCeiling lift hoods with remote control.
The following steps must be carried out in parallel on the
hob and on the extractor hood.
Perform the following steps for the control panel supplied
with your extractor hood.
Extractor hoods with control panel “V8”
Press and hold both buttons at the
same time (> 3 sec.) to start the
connection process.
Both buttons flash for 2 minutes.
Extractor hoods with control panel “V7”
Press and hold both buttons at the
same time (> 3 sec.) to start the
connection process.
Both buttons flash for 2 minutes.
Ceiling lift hoods
The additional buttons are located under
the cover on the underside of the hood.
Press and hold the two additional
buttons at the same time (> 3 sec.),
to start the connection process.
Perform the following step on the hob if the buttons on the
extractor hood are flashing.
Switch on the hob.
Touch the symbol (> 5 sec.) to start
the connection process.
The dot above the symbol flashes for
2 minutes.
The devices are successfully connected when the symbols for
operating the extractor hood appear on the hob.
4.7 Operation of the extractor hood
To achieve an optimal efficiency in removing cooking fumes:
Turn the extractor hood on 1-2 minutes before you start
cooking. This allows the flow of air to build up, and the
fumes are removed at an early stage.
During the cooking process, switch to a power level that
is appropriate for the intensity of the cooking vapours.
If the intensity of the cooking vapours does not subside,
switch to a higher power level.
Switch to the power level setting when searing.
The “P” display flashes. After 6 minutes, the extractor
hood automatically switches back to power level 3.
To activate the power level setting permanently, the
corresponding button must be pushed again. In this
case the extractor hood does not switch back and the “P
display lights up.
Check the fresh air supply at regular intervals.
Also use the extractor hood to reduce other unpleasant
smells. Such as from:
yOnions and garlic
yOven, microwave and steamer
yFondue and raclette
Turn on the run-on function when you have finished
cooking.
Switch the extractor hood off after use. If the automatic
run-on function is activated, the run-on time (10 minutes)
starts in power level 1.
After 12 hours without operation, the extractor hood (incl.
lighting) automatically switches off.
Selecting additional functions is possible via the menu button.
Press the menu button.
yThe extraction changes the menu level.
yOnly the symbols of the functions available
in the respective menu level are displayed.
DThe functions are described in the
respective sections.
If no input is made, the operating group
changes back to menu level 1 after 2 seconds.
Every marking on the slider stands for the
function indicated by the symbol above the
marking.
Press the slider at the position below
the symbol to select the corresponding
function.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BKF 90 iPP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BKF 90 iPP in the language / languages: English as an attachment in your email.

The manual is 7.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BKF 90 iPP

Berbel BKF 90 iPP User Manual - German - 36 pages

Berbel BKF 90 iPP User Manual - Dutch - 36 pages

Berbel BKF 90 iPP User Manual - French - 36 pages

Berbel BKF 90 iPP User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info