784243
33
Zoom out
Zoom in
Previous page
1/44
Next page
33
Operation
6006382_a – 17.05.2022
EN
4.7.1 Filter filling indicator
The device has a check indicator in order to remind the
operator to change the filter filling. If no recirculated air filter
is used, the control indicator does not have any meaning.
The function is set so that the symbol flashes every 1,000 fan
operating hours (flash duration 120 seconds) as soon as
the device is turned off. The hours counter is restarted by
switching off the control indicator.
The symbol lights up, the filter filling must be
replaced.
D“6.2 Maintenance” (page 36).
After replacement of the filter filling:
Touch the 7-segment display of the
extraction for 5 seconds.
Then touch the symbol at the same time.
yThe counter restarts.
4.7.2 Window contact switch
If a window contact switch is connected to the device,
this monitors whether the corresponding window is open
or closed. Extraction only takes place with an open window
or in recirculated air mode.
The symbol flashes:
yA window contact switch is connected to
the device.
yThe window is closed.
yThe device does not perform extraction.
Open the window.
yExtraction can be used.
4.7.3 Run-on function
The device comes with a run-on function. If this function
is used, the device will operate for a further 10 minutes at
power setting after it has been switched off.
In recirculated air mode, it is necessary to use the run-on
function so that the device can remove the remaining
odours. Using the run-on function increases the life of the
filter filling. The filter filling must be replaced at regular
intervals.
The device is switched on.
If the automatic run-on function is activated:
Touch the button one time.
yThe device switches off.
yThe run-on time (10 minutes) starts
automatically in power level 1.
yThe 7-segment display for the extraction
displays power level 1.
yThe run-on function symbol flashes.
yIt is possible to switch between the power
levels.
If the button is touched again, the device
shuts off completely.
The device is switched on, and any power
level is selected.
Touch the symbol one time.
yThe run-on time (10 minutes) starts in the
selected power level.
yThe 7-segment display for the extraction
displays the active power level.
yThe run-on function symbol flashes.
yIt is possible to switch between the power
levels.
If the symbol is touched again, the run-on
function stops.
The run-on function can be switched on manually or
automatically. As delivered, the automatic run-on function
is activated.
Touch the 7-segment display of the
extraction for 5 seconds.
Then touch the symbol at the same time.
yThe symbol illuminates - automatic run-on
is activated.
yThe symbol flashes - automatic run-on is
deactivated.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BKA 90 DLI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BKA 90 DLI in the language / languages: English as an attachment in your email.

The manual is 15.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BKA 90 DLI

Berbel BKA 90 DLI User Manual - German - 44 pages

Berbel BKA 90 DLI User Manual - Dutch - 44 pages

Berbel BKA 90 DLI User Manual - French - 44 pages

Berbel BKA 90 DLI User Manual - Italian - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info