784210
32
Zoom out
Zoom in
Previous page
1/36
Next page
32
Dismounting
6005735_0 – 31.03.2021
7. Dismounting
DWARNING!
Danger of injuries through improper handling!
Taking the device down requires a great deal of physical
exertion due to its size and weight. If the device falls down,
serious injuries are possible.
Two persons are required to take the device down.
Ensure stable footing when taking the device down.
Ensure that no other people are in the working area.
DATTENTION!
Danger of property damage through improper handling!
Taking the device down requires a great deal of physical
exertion due to its size and weight. If the device falls, the
device, kitchen furnishings and other objects could be
damaged.
Cover the cooled hob.
Keep the installation area clear.
Disconnect all poles of the power supply for the device.
Push up on the front panel in the closure area, until the
closure can be heard to open. The front panel may tip
forwards slightly.
Release the knurled nuts and retaining rope from the
chimney stack.
Remove the front panel.
For recirculating air and hybrid operation:
Remove the filter.
For extracted air and hybrid operation:
Remove the exhaust air duct.
Release the threaded connection for the rear panel on the
inside of the chimney stack.
Lift the rear panel off the device.
Release the threaded connection of the side parts.
Lift the side parts away from the device.
Unplug the Wieland plug from the chimney stack.
Remove the cover from the cable compartment on the
chimney stack.
Remove the wiring from the hood body.
If present:
Remove any accessory connection cables.
Release the threaded connection of the cladding panels
on the flue.
Fold the cladding panels downwards.
Pull the cladding panels off.
Release the threaded connection for the hood body on
the chimney stack.
Secure the hood body against falling with a second
person.
Release the metal clips from the hood body on the
chimney stack.
Pull the hood body down and off.
Set the hood body down on a firm and protective surface.
Undo the nuts on the bolt anchors.
Only remove the nuts at the elongated holes.
Rotate the chimney stack such that it can be removed via
the nuts on the lock holes.
Remove the chimney stack.
Remove the bolt anchors from the ceiling.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BIH 90 BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BIH 90 BL in the language / languages: English as an attachment in your email.

The manual is 19.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BIH 90 BL

Berbel BIH 90 BL User Manual - German - 36 pages

Berbel BIH 90 BL User Manual - Dutch - 36 pages

Berbel BIH 90 BL User Manual - French - 36 pages

Berbel BIH 90 BL User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info