784206
12
Zoom out
Zoom in
Previous page
1/28
Next page
12
Installation
6006244_0 – 30.05.2022
6
Screw the nuts and the washers onto the bolt anchors in
the position of the lock holes.
Ensure that there is at least a 6 mm gap between the
ceiling and the top edge of the washers.
Push the ceiling mounting plate over the nuts in the lock
holes.
Twist the ceiling mounting plate so that it is held by the
nuts.
Ensure that the ceiling mounting plate is hanging
securely.
Screw the nuts and the washers onto the bolt anchors in
the slots.
Ensure that the ceiling mounting plate is aligned parallel
to the hobs front edge.
Tighten the nuts cross-wise using the spanner.
Ensure that all nuts are fully tightened.
The ceiling mounting plate is hanging securely and aligned
correctly on the ceiling.
The Wieland socket, cable anchor and earthing cable can
be installed in the pre-drilled positions on either side of the
ceiling mounting plate.
DWARNING!
Risk of death due to electric shock!
Touching live parts can cause an electric shock, burns or
death.
Ensure that the power supply is switched off and remains
so.
Observe the voltage specifications on the ratings plate.
Connect the Wieland socket to the power supply
provided by the customer.
Connect the Wieland socket to the ceiling connection
plate.
Route the cables so that they are not kinked, crushed or
damaged.
Make sure that the device can be disconnected on all
poles from the electricity supply after installation.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BIH 160 SKF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BIH 160 SKF in the language / languages: English as an attachment in your email.

The manual is 5.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BIH 160 SKF

Berbel BIH 160 SKF User Manual - German - 28 pages

Berbel BIH 160 SKF User Manual - Dutch - 28 pages

Berbel BIH 160 SKF User Manual - French - 28 pages

Berbel BIH 160 SKF User Manual - Italian - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info