784201
12
Zoom out
Zoom in
Previous page
1/28
Next page
12
Installation
6006241_0 – 30.05.2022
3.4.3 Install the ceiling mounting plate
The device is designed to be hung on ceilings.
When mounting to a solid ceiling:
Make sure that the ceiling has sufficient load bearing
capacity.
Ensure that the ceiling is level and horizontal.
Use the fastening materials provided.
With different installation situations:
Enquire about alternative fastening systems (e.g. consult
with your architect).
Only use fastening hardware suitable for the type of
ceiling.
Variant without ceiling effect lighting
The Wieland socket and earthing cable can be installed in the
pre-drilled positions on either side of the ceiling mounting
plate.
Variants with integrated ceiling effect lighting
In the case of versions with integrated ceiling effect lighting,
the ceiling mounting plate must be positioned such that the
customers supply voltage can be connected on the side with
the connection terminal.
All variants
When hanging, first attach the ceiling mounting plate to
the ceiling and then screw the hood body onto the ceiling
mounting plate.
= =
a
= =
b
c
BIH95SKC,
BIH95SKE,
BIH95SKE Light
BIH115SKC,
BIH115SKE,
BIH115SKE Light
BIH135SKE,
BIH135SKE Sound
aGap between two
bolt anchors 721 mm 1021 mm 1183 mm
bGap between two
bolt anchors 270 mm 200 mm 200 mm
cDiameter of circle
over slots 770 mm 1040 mm 1200 mm
Determine the hanging position. Observe the hob
position:
yThe ceiling mounting plates centre point is directly
above the hobs centre point.
yThe ceiling mounting plate runs parallel to the hob.
Make sure that the legal safety clearances will be
complied with:
yWith gas hobs, at least 650 mm.
yRecommendation with electric hobs 650 mm.
Observe the specifications for the cooking appliances
(e.g. installation above a solid fuel stove).
DWARNING!
Risk of death due to explosions or electric shock!
Drilling through gas, water or electrical lines can lead to
hazardous situations.
Ensure that there are no lines in the ceiling at the
fastening points.
Ø 8
65
Determine the locations of the fastening points and mark
them:
y2 bolt anchors inside the lock holes.
y2 bolt anchors in the centre of slots.
Drill the holes in the ceiling.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BIH 135 SKC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BIH 135 SKC in the language / languages: English as an attachment in your email.

The manual is 5.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BIH 135 SKC

Berbel BIH 135 SKC User Manual - German - 28 pages

Berbel BIH 135 SKC User Manual - Dutch - 28 pages

Berbel BIH 135 SKC User Manual - French - 28 pages

Berbel BIH 135 SKC User Manual - Italian - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info