784204
23
Zoom out
Zoom in
Previous page
1/28
Next page
23
Maintenance
6006244_0 – 30.05.2022
EN
Moisture in the device.
yDripping or splashing water has penetrated the device.
yLiquid (e.g. from vases, bottles on the device) has
penetrated the device.
Immediately shut off the power supply, by removing
the fuse.
Make sure that the power supply cannot be
unintentionally reconnected. For example by tasking
a person with ensuring that the fuse/breaker is not
restored/switched on.
Ensure that no more liquid can penetrate the device.
Allow the device to dry.
Have the device checked and repaired by qualified,
specialist personnel prior to using the device again.
After a power interruption, the “Raise” button flashes on the
remote control.
yThe power supply dropped out whilst the drive motor
was in operation. The device is in calibration mode and
requires a reference run.
Press the “Raise” button on the remote control.
The device moves fully upwards once again and then into
the set top end position.
The “Raise” and “Lower” buttons on the remote control flash but
the device does not move.
yThe safety switch-off took place because a problem was
detected (e.g. faulty winding or tearing of a suspension
rope).
Please consult your dealer or customer services.
The device does not react to inputs on the remote control.
Observe the instruction manual for the remote control.
If a fault persists:
Please consult your dealer or customer services.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BIH 120 SKF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BIH 120 SKF in the language / languages: English as an attachment in your email.

The manual is 5.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BIH 120 SKF

Berbel BIH 120 SKF User Manual - German - 28 pages

Berbel BIH 120 SKF User Manual - Dutch - 28 pages

Berbel BIH 120 SKF User Manual - French - 28 pages

Berbel BIH 120 SKF User Manual - Italian - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info