784211
20
Zoom out
Zoom in
Previous page
1/36
Next page
20
Installation
6005735_0 – 31.03.2021
3.5.12 Connecting exhaust air ducting (with extracted
air and hybrid mode)
Extracted air mode without BackFlow technology
The BackFlow port is not used. When connecting a
flexible hose, it is possible to use a tight-fitting pipe as an
intermediate piece.
2.
Establish a chamfer on the inside of the exhaust air
ducting.
Fit the exhaust air ducting directly onto the outlet in the
fan housing from above.
Extracted air mode with BackFlow technology
The BackFlow port is used.
D“3.5.10 Fitting the BackFlow port (page 19).
2.
1.
2.
Fit the exhaust air ducting onto the BackFlow port from
above.
Seal the transition between the exhaust air ducting and
the BackFlow port with sealing tape (accessory).
Hybrid mode
2.
Fit the exhaust air ducting onto the collar of the hybrid
filter from above.
All variants
Ensure that the exhaust air duct is correctly fitted.
3.5.13 Fit the front panel
Unscrew the knurled nut from the chimney stack.
Make sure that the closure on the front panel is open.
Attach the front panel to the hood body at the bottom
on the bolts.
Fit the free end of the retaining rope onto the threaded
bolt on the chimney stack.
Screw the knurled nut to the chimney stack until hand-
tight.
Press the front panel up between the side parts until the
closure can be heard to latch. If necessary, the closure can
be adjusted via slotted holes.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BIH 120 BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BIH 120 BL in the language / languages: English as an attachment in your email.

The manual is 19.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BIH 120 BL

Berbel BIH 120 BL User Manual - German - 36 pages

Berbel BIH 120 BL User Manual - Dutch - 36 pages

Berbel BIH 120 BL User Manual - French - 36 pages

Berbel BIH 120 BL User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info