784230
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
Operation
6005142_0 – 24.02.2020
4.2.4 Window contact switch
If a window contact switch is connected to the device, this
monitors whether the corresponding window is open or
closed. Extraction only takes place with an open window or
in recirculated air mode.
Button Function
Button flashes:
yA window contact switch is connected to
the device.
yThe window is closed.
yThe device does not perform extraction.
Open the window.
yExtraction can be used.
4.2.5 Cooktop lighting
The cooktop lighting is dimmable and is equipped with
energy-saving LEDs. The lighting can be used independently
of the fan. It can be switched on when the device is on.
It can be switched off at any time.
The colour temperature can be changed.
Button Function
Dimmer.
Press the button once to switch the
cooktop lighting on or off.
Hold the button (more than 1 second)
to start the dimmer. After releasing the
button, the cooktop lighting remains at
the selected brightness.
After switching off, the cooktop lighting
starts with full brightness the next time it is
switched on.
Colour temperature.
Touch the button 1x.
Touch and hold the button again within
half a second to start the colour cycle.
The cooktop lighting switches on, the colour
cycle starts.
Release the button when the desired
colour temperature is reached.
The colour cycle stops, and the selected
colour temperature is saved.
4.2.6 Run-on function
The device comes with a run-on function. When the function
is used, the device continues to work 10 minutes after being
switched off.
In recirculated air mode, it is necessary to use the run-on
function so that the device can remove the remaining odours.
Using the run-on function increases the life of the filter filling.
The filter filling must be replaced at regular intervals.
The run-on function can be switched on manually or
automatically. The device is delivered with the automatic run-
on function active, and settings are made in configuration
mode.
D“4.3 Configuring the device” (page 25).
Button Function
The device is switched on.
If the automatic run-on function is activated:
Touch the button one time.
yThe device switches off.
yThe run-on time (10 minutes) starts
automatically in power level 1.
yThe button for power level 1 goes on.
yThe run-on function button flashes.
yIt is possible to switch between the power
levels.
If the button is touched again, the device
shuts off completely.
The device is switched on, and any power
level is selected.
Touch the button one time.
yThe run-on time (10 minutes) starts in the
selected power level.
yThe button for the active power level lights
up.
yThe run-on function button flashes.
yIt is possible to switch between the power
levels.
If the button is touched again, the run-on
function stops.
4.2.7 AutoRun
Devices equipped with the AutoRun module start automatically
when the cooktop is turned on. When the cooktop is turned
off, the device switches to run-on function and then switches
off.
The AutoRun automation is set in configuration mode.
D“4.3 Configuring the device” (page 25).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BEH 60 FLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BEH 60 FLT in the language / languages: English as an attachment in your email.

The manual is 10.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BEH 60 FLT

Berbel BEH 60 FLT User Manual - German - 36 pages

Berbel BEH 60 FLT User Manual - Dutch - 36 pages

Berbel BEH 60 FLT User Manual - French - 36 pages

Berbel BEH 60 FLT User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info