711330

Beper VE119 Manual

10
Zoom out
Zoom in
Previous page
1/36
Next page
Tripod Fan Use instructions
10
PRODUCT AND ACCESSORIES Fig.A
1. Telescopic tube
2. Adjust high nut
3. Legs holder
4. Legs
5. Rubber feet
6. Motor
7. Grid locking hooks
8. Blade
9. Front and back grid
10. Swing on/off button
11. Adjust inclination knob
FAN ASSEMBLY Fig.B
1. Insert and screw the legs in the legs holder.
2. Adjust the high of the telescopic tube
3. Insert the motor on the telescopic tube and x it with the appropriate screws.
4. Place the back grid in the housing and secure it with the 4 screws.
5. Place the blade and secure it with the appropriate screw.
6. Place the front grid and secure it with the screw and the locking hooks.
Important: Firmly weld all components and assure that the legs will be open completely, to ensure good
stability of the fan, otherwise it could oscillate dangerously.
SPEED SELECTION
Choose the speed desired pressing on the buttons of the control panels.
Position 0 the fan switch off.
Position 1 low speed.
Position 2 medium speed.
Position 3 high speed.
HEAD INCLINATION
It is possible to choose various positions and change the air ow swing.
Before changing it, switch off the fan.
Take the motor body, unscrew the adjust inclination knob and change the inclination of the fan as desired and
screw the knob strongly.
Attention : do not try to force the inclination position in order to avoid any failure.
SWING
It is possible to activate or disconnect the swing of the fan, by touching appropriate button. Swing allow to provide
the air uniformly.
To activate the swing push the button down until completely blocked ; the head fan turns automatically from right
to left.
To disconnect the swing raise the button completely.
CLEANING
Before cleaning, switch off and unplug the fan.
For cleaning use a soft cloth, that may be softly wet.
Do not use alcohol or chemical substances, or any detergent that could damage this appliance.
Do not allow water or other liquids to penetrate in the fan, in order to protect it.
After cleaning, dry every parts before using the appliance.
During the winter and when not used, keep this appliance in a dry and clean place.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper VE119 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper VE119 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info