711192
26
Zoom out
Zoom in
Previous page
1/48
Next page
Ανεμιστήρας με ορθοστάτη με χρονοδιακόπτη Εγχειρίδιο οδηγιών
26
Μην συνδέετε αντικείμενα στο πλέγμα ή στο εσωτερικό της συσκευής.
Μην τραβάτε το καλώδιο τροφοδοσίας για να αποσυνδέσετε τη
συσκευή. Μετά τη χρήση του ανεμιστήρα, αποσυνδέστε την παροχή
ρεύματος. Αν ο ανεμιστήρας πρέπει να αποθηκευτεί για μεγάλο
χρονικό διάστημα ή δεν χρησιμοποιείται, επανατοποθετείστε τον στην
αρχική συσκευασία του, σε ξηρό μέρος. Για κάθε επόμενη χρήση,
βεβαιωθείτε ότι ο ανεμιστήρας είναι καθαρός και ότι οι λεπίδες γυρίζουν
με το σωστό τρόπο (έχοντας τον ανεμιστήρα απενεργοποιημένο).
Περιγραφη του προϊοντος Εικ. Α
1. Front grid
2. Closure nut
3. Nut blades
4. Blades
5. Rear grid nut
6. Rear grid
7. Motor
8. Swing button
9. Body motor
Assembly instructions
Put the base on the oor.
Insert completely the internal pipe inside the external pipe.
Fix the high adjustment handle.
Fix the external pipe to the base with the screw (included in packaging).
Take off the external pipe, and regulate it until the desired height. Strongly screw the high adjustment handle.
Place the control panels on the pipe.
Screw completely with the screw in order that the control panels is well xed to the intern pipe.
Place the rear grid on the motor, in order that the holes of the grid are well inserted into the motor of the fan
Strongly and completely screw the rear grid in order to block the grid on the motor.
Insert the blades of the fan on the motor and completely screw the nut blade on the motor, in order to block the
body motor.
Assembly the 2 grid front and rear ones by inserting the closure nut, place the front grid, on the rear grid. Close
the nuts to block the grids.
Speed selection
Choose the speed desired pressing on the buttons of the control panels.
Position 0 the fan switch off.
Position 1 low speed.
Position 2 medium speed.
Position 3 high speed.
Timer
The timer can be set from 10 to 60 minutes by turning the knob on the control panel. Once the time set has
expired, the fan will shut off automatically.
Head inclination
It is possible to choose various positions and change the air ow swing.
Before changing it, switch off the fan.
Take the motor body, unscrew the regulation axis and change the inclination of the fan as desired and screw the
air strongly.
Attention: do not try to force the inclination position in order to avoid any failure.
10. Inclination set button
11. Timer
12. Control panels
13. Screw for pipe
14. Internal pipe
15. External pipe
16. High adjustment handle
17. Screw pipe coupling with clamping washer
18. Base
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper P206VEN130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper P206VEN130 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info