711193

Beper P206VEN100 Manual

9
Zoom out
Zoom in
Previous page
1/52
Next page
Stand fan Use instructions
EN
9
Description of the item Fig.A
1. Front grid
2. Closure nut
3. Nut blades
4. Blades
5. Rear grid nut
6. Rear grid
7. Motor
8. Swing button
9. Body motor
10. Inclination set button
Assembly instructions Fig. B
Put the base on the oor.
Insert the inner pole inside the outer pole.
Insert the base ornamental pin and x the high adjustment handle.
Fix the pouter pole to the base with the 4 screws (included in packaging).
Important: rmly fasten the screws to the base in order to guarantee the good stability of the fan,
otherwise the fan will dangerously swing.
Take off the outer pole, and adjust it to the desired height. Securely fasten the high adjustment handle.
Place the control panel on the pole.
Fasten completely with the screw, so that the control panel is well xed onto the inner pole.
Place the rear grid on the motor, so that the holes of the grid are well inserted into the motor of the fan.
Firmly and securely fasten the rear grid in order to block the grid on the motor.
Insert the blades of the fan on the motor and completely screw the nut blade on the motor, in order to block the
body motor.
Assembly the 2 grids (front and rear) by inserting the closure nut, place the front grid on the rear grid.
Close the nuts to block the grids.
Speed selection
Choose the desired speed by pressing on the buttons of the control panel.
Position 0 the fan is off.
Position 1 for low speed.
Position 2 for medium speed.
Position 3 for high speed.
When the fan is on, the night light switches on.
Head inclination
It is possible to choose various positions and change the air ow direction.
Before adjusting the inclination, switch off the fan.
Take the motor body, unscrew the regulation axis and change the inclination of the fan as desired; then fasten
rmly.
Warning: do not try to force the inclination position in order to avoid any failure.
Swing function
When pressing the swing button, it is possible to activate or deactivate the swing function, by pressing the swing
pin. Swing function provides a more even distribution of air ow in the room.
To activate the swing function, push the swing pin down until completely blocked; the head fan turns automati-
cally from right to left.
To deactivate the swing function, raise the pin completely.
Cleaning
Before cleaning, switch off and unplug the fan.
For cleaning use a soft cloth, that may be slightly damp.
Do not use alcohol or chemical substances, or any detergent that could damage this appliance.
11. Night light
12. Control panels
13. Screw for pipe
14. Inner pole
15. Outer pole
16. High adjustment handle
17. Base fastening screws
18. Base ornamental pin
19. Base
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper P206VEN100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper P206VEN100 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info