710619

Beper BT710 Manual

8
Zoom out
Zoom in
Previous page
1/40
Next page
8
Crepe maker Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other uids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly ammable mate-
rials, gases, burning ames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
Some warnings:
1. : this symbol indicates that the product reaches high temperatures and there is the risk of burn.
1. Never immerse the product or power cord in water or other liquid.
2. Always use extreme care when the product is used near and / or in the presence of children.
3. Always unplug the product from the power outlet when not in use and while cleaning.
4. Allow the product to cool down before proceeding with any cleaning operations and before storing.
5. Do not use the product if the power cord and / or some components are damaged.
6. This product is for household use only.
7. Do not let the cord hang over the edge of a table or counter, or/and touch hot surfaces.
8. This product should be used only for the purpose for which it was designed.
Description of the product: Fig.1
1. Non-stick cooking plate
2. On/Off switch
3. Handle
4. Bowl for batter
Use:
1. Remove the packaging and check the integrity of the product.
2. Clean the non-stick plate with a soft, slightly damp cloth. Dry carefully.
3. Clean the bowl with water and neutral soap, rinse well and dry.
4. Place the product and the container on a at and stable surface, making sure you have enough space to move
and keep away from walls and / or cabinets.
5. Connect the power cord to a power outlet. Switch the power button on “I=ON”, the power button will light red,
indicating that the product starts to heat up.
Note: For the rst (1-2) uses, it may be that the product emits a little smoke and a slight burning smell. This is
normal and does not preclude the good use of the product. However, it is advisable not to use the rst crepes but
to do some for the sole purpose of starting the appliance.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BT710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BT710 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info