710620
7
Zoom out
Zoom in
Previous page
1/28
Next page
7
Crepes maker Use instructions
EN
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other uids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly ammable mate-
rials, gases, burning ames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
DESCRIPTION Fig.A
1. Power on indicator light (GREEN)
2.Temperature indicator light (RED)
3.Non-stick coking plate
USE INSTRUCTION
Before rst use, remove the packing and stickers from the unit and clean the cooking plate with a wet cloth, and
wipe carefully.
Connect the appliance to the socket, the power on indicator light (1) and the temperature indicator light (2) lights
up. Select the desired temperature by turning the knob, the temperature indicator light (2) will switch off till the
cooking plate reach the selected temperature.
When cooking crepes, preheat the cooking plate, set the temperature then pour a small quantity of batter in the
middle of the cooking plate.
Spread the batter quickly in a circular motion using the wooden rack (6) until the desired diameter crepes. Leave
the crepe cook till the batter will look solid than it can be moved more easily on the cooking plate. Place a spatula
under the crepe and return it to cook on the other side. Cook until the crepe is lightly golden.
Remove the crepe from the cooking plate with the spatula. If the crepe is too cooked, set a lower temperature
before making crepes again. When cooking is complete, turn off the appliance by turning the knob (4) on “OFF”
position. Disconnect from the socket. Leave the appliance cool down, and clean before storing.
CLEANING AND CARE
Always clean the appliance after use. Make sure the unit is disconnected from the socket.
Wait until the unit is completely cool down.
Clean the cooking plate with a wet cloth.
If food residue on the cooking plate, use this method: put some oil on it. Leave it for about 5 minutes, and remove
with a wet soft, and wipe carefully. Wipe the appliance before storing it.
4.Switch on/off and temperature selector knob
6.Unit
7.Wooden T stick
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BT700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BT700 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info