Manual Beper BT410 (page 12 of 52) (English, German, Dutch, French, Italian, Spanish)

710499

Zoom out

Zoom in

1/52

Electric Barbecue Use instructions

PRODUCT DESCRIPTION: Fig.A

1. Body

2. Liquid collection tray

3. Heating element

4. Grid

Assembly and operation:

1) Remove the packaging.

2) Check that the product is intact and that all the components are present.

3) Clean all components as indicated in the specic “Cleaning” section.

4) Fill the tank with water, taking care not to exceed the MAX indication.

Place the heating element in the appropriate housing.

ATTENTION: The product is equipped with a safety system that will not allow the ignition if the heating

element is not correctly positioned. Fig.B

ATTENTION: THE HEATING ELEMENT MUST NEVER TOUCH THE WATER AND THE METAL TRAY.

5) Place the grill at the desired height.

6) Insert the plug into the socket.

7) Set the heating element control knob to the “Max.” Position. The indicator light comes on and the heating

element is permanently lit.

When switched on for the rst time, the grill may emit an unpleasant odor and a small amount of smoke. We

therefore recommend heating the barbecue for about 5 minutes without food.

After about 5-10 minutes, the heating element should reach the right temperature for grilling.

8) The grill can also be used to keep food warm: turn the temperature control knob to a lower position, the hea-

ting element will turn on and off alternately, and then the food can be kept warm.

9) The water initially placed in the appropriate container will evaporate during use. So be careful not to let the

water run out, but top up continuously. Be careful not to pour water on the heating element.

10) At the end of the grilling, turn the thermostat to position “0” and disconnect the product from the socket.

THE PRODUCT IS EQUIPPED WITH AN ANTI-TILT SAFETY SYSTEM THAT WILL TURN OFF THE RESI-

STANCE IN CASE OF FALL OF THE BARBECUE.

Maintenance and cleaning:

Before carrying out any cleaning operation, make sure that the product is switched off and that it has cooled

down.

Clean the grill and the product immediately after use.

Empty the residual water.

Clean the grill and the tray with a soft cloth and a little neutral soap.

Clean the heating element with a clean, dry cloth.

Do not use abrasive products or metal sponges to avoid damaging the surfaces.

Before storing the product, make sure it is completely dry.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beper BT410 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beper BT410 Manual

Product: