710497

Beper BT402 Manual

9
Zoom out
Zoom in
Previous page
1/32
Next page
9
EN
2in1 Electric Barbecue Use Instructions
USAGE
1. Check that the voltage of the electric socket corresponds to the voltage indicated on the appliance
2. Make sure that the grill plates (3) and the drip tray (5) are well inserted.
3. It’s possible to choose the griddle side or the smooth side.
4. Check that the 2 temperature control knobs (4) are placed in the “Min” position.
5. Plug the appliance to an electric socket and the power indicator light (6) will turn on.
6. Turn the temperature control knob (4) of each grill plate clockwise to select the suitable temperature. The
temperature control light (7) will turn on and the grill plate will start heating up. It is possible to use one grill plate
at a time or both at the same time.
7. Reheat the plate to the desired temperature before grilling. Once the set temperature level is reached, the
temperature control light (7) will turn off.
8. Add food onto the grill plate(s). Grilling time depends on types of food and on personal taste.
9. Once the grilling is nished, turn back the temperature control knobs (4) to “Min” position and unplug the
appliance.
10. Food is now cooked and ready to be served.
USEFUL SUGGESTIONS
1. Defrost frozen foods before grilling them.
2. To grill meat, set the temperature to “Max” position and make sure that the grill has been fully preheated before
grilling.
3. Handle with care not to scratch the coated surface of the non-stick plates (3), otherwise they may lose their
non-stick quality. Use a wooden or silicone or nylon spatula. Do not use sharp and/or pointed metal objects.
4. In the event of partial use of the grill surface, place all food in the centre of the grill.
CLEANING AND MAINTENANCE
1. Before cleaning the appliance unplug it from the wall socket.
2. Leave the grill to cool down completely
3. With one hand press the plate release button (2) to release and with the other lift the plate.
4. Wash the grill plates (3) and the drip tray (5) under water with dish washing liquids.
5. Do not use scouring pads or metal scourers so as not to scratch the non-stick coating .
6. If any water gets on the electric connections, allow to dry before using again.
TECHNICAL DATA
Power: 2000 W
Voltage: 220-240V, 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BT402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BT402 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info