710628

Beper BT150 Manual

9
Zoom out
Zoom in
Previous page
1/32
Next page
9
Hot dog maker Use instructions
EN
ONLY be added when the cooking process has completed and the foods have been removed from the appliance.
- Plug the appliance into the mains power and set the toasting level using the dial (E).
IMPORTANT:
Set the toast setting dial to a lower level for dry or thinner types of bread.
- Lower the on lever (D) until it is locked in place.
Note: if the appliance is not connected to the mains power, then the lever will not lock in place.
- Wait a few minutes and after the bread has been automatically ejected from the grill (A) check the cooking and
if the foods are not done to taste, then select a higher toasting level and/or repeat the cooking process.
- Press the button (F) to interrupt the toasting stage at any time.
IMPORTANT:
The hot dog grill (A) is very hot. To remove it without the risk of burning, always use the special tongs (G) pro-
vided or an oven mitt. After several cooking, it is recommended to let product cool down for at least a minute
before a new cycle.
CLEANING
IMPORTANT:
Before cleaning, unplug the appliance from the power mains and wait for all hot parts to cool.
Keep the appliance clean and tidy, as this will guarantee optimum toasting and a longer lifetime for the appliance.
- The grill must only be cleaned with a non-abrasive and slightly damp cloth with a little mild detergent (never use
solvents that could damage the metal).
- Any food residues that fall into the crumb tray (H) need to be removed at every use; take out the tray and wipe
clean with a damp cloth, then dry thoroughly and ret it.
- Clean the exterior of the appliance with a damp cloth and then dry. Do not use abrasive detergents as they can
ruin the surfaces.
- Put away the appliance, winding the power cord around the special cord winder
TECHNICAL DATA
Power 750W
Power supply 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BT150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BT150 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info