710490

Beper BT110 Manual

9
Zoom out
Zoom in
Previous page
1/40
Next page
9
Toaster Use instructions
EN
DESCRIPTION Fig.1
1. Slots
2. Defrost button
3. Switch lever
4. Reheat button
5. Stop/Cancel button
6. 7 levels toasting knob
7. Anti-slip foot
8. Removable crumb tray
USE
Remove all packaging and clean the appliance carefully.
Place the appliance on a stable and at surface.
Insert pieces of bread in the sandwich slots.
Plug the cord supply into the socket.
Turn the knob to select the toasting level desired between 7 levels.
Put down the switch lever and the toaster start working, it will stop automatically when the time/level is over,
bread will rise automatically from the slots.
If bread is not enough toasted, select higher toasting level, or if it is too much toasted, select lower one. The
toasting can be stopped in any time by pressing the stop/cancel button; the sandwich will automatically rise from
the slots.
Take care while touching the bread as it will be very hot.
The toaster is equipped with 2 additional functions:
“Defrost” function
Frozen slices of bread may be toasted by pressing the defrost button immediately after lowering the lever; the
toasting cycle will be lengthened in order to achieve the desired browning. The defrost indicator light will remain
lit while the defrost function is in use.
“Reheat” function
To warm toast that has popped up but gone cold, lower the lever again and then press the ‘Reheat’ button.
Please note that this is xed reheat time which cannot be adjusted by the browning control. The reheat function
can be cancelled at any time by pressing the Stop/Cancel button . The reheat indicator light will remain lit while
the reheat function is in use.
FOR BETTER TOASTING
When used for the rst time, do not put bread into the toaster; that will allow to the heat resistance to pre-heat
and to eliminate the smell of “new” . To get better results, use same thickness, size and freshness piece of bread.
Do not put food that could make juice or other, in order to prevent from damages or re and make it hard to clean.
The slide-out crumb tray must always be cleaned after each use.
To get homogeneous toasting, it is recommended to wait at least 30 seconds for toasting again.
CLEANING AND CARE OF THE TOASTER
Always unplug the cord supply from the socket before cleaning or care. Let the toaster to cool. The external part
of the toaster can be cleaned with a smooth cloth. Do not use alcohol, abrasive detergents or every detergent
that could damage the toaster. Do not immerse into water. After use, unplug the cord supply from the socket and
let the toaster to cool down before store it. If there remain embedded pieces of bread, unplug the cord supply
from the socket, turn over and slightly shake the toaster. Do never touch the parts of the toaster with cutting
utensils, especially inside the slots.
After each use open the removable crumb tray, empty it and clean with a soft dampened cloth.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BT110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BT110 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info