710354

Beper BP580 Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
10
Electric Coffee Grinder Use instructions
Product description Fig.1
1. Bean hopper lid
2. Bean hopper
3. Bean hopper holder
4. Bean hopper release button
5. Grind selector
6. Body
7. Ground coffee outlet
BEFORE USE:
Before using the appliance for the rst time, wash the bean hopper, bean hopper lid, ground coffee container lid
and ground coffee container well, ensuring that they are rinsed and dried thoroughly.
USAGE:
Place the appliance on a at surface.
Assemble the bean hopper to the bean hopper holder by following the operation as below: Firstly, put the bean
hopper into the bean hopper holder by making the tab on the bean hopper align with the groove on the bean
hopper holder and then turn the bean hopper clockwise until it is tightly locked into the bean hopper holder.
NOTE: The bean hopper is equipped with microswitch so that it must be assembled in position before
operate, or the appliance will not work.
Pour appropriate amount of coffee beans into the bean hopper (q.ty Max 360gr).
Close the bean hopper lid.
Put the ground coffee container (with lid in position) on the ground coffee container holder.
Select your desired coffee grinding while using the grind selector . Possible selections from 1 to 15. (1= ne –
15=coarse).
The coffee-dispensing amount is determined by grinding time, therefore, you can turn the knob to select your
desired grinding time by referring to “ Table 1” before switch on the appliance. When select, the corresponding
indicator of your selected grinding time will light up. If you do not want to adjust the grinding time, the appliance
will work under the default grinding time.
It is advisable to grind only the amount of coffee you need and avoid
storing ground coffee for several days.
8. Ground coffee container holder
9. Ground coffee container
10. Groound coffee container lid
11. Quantity selector knob
12. Start/Stop button
13. Removable grinder
14. Handle for removable grinder
Indicator The rst indi-
cator (Default
setting)
The second
indicator
The third
indicator
The fourth
indicator
The fth
indicator
The sixth
indicator
(From left to
right)
5 minutes 10 seconds 20 seconds 30 seconds 40 seconds 50 seconds
Connect the appliance with the power source, the rst indicator (the default grinding time setting) lights up au-
tomatically.
Press the Start/Stop button, the appliance starts to grind coffee bean. The indicator of Start/Stop button keeps
blinking during grinding process.
You can press Start/Stop button to make the appliance stop running at any time during grinding process.
Attention:
The appliance will enter into the sleep state if no any operation within 90 seconds after plug in.
The maximum amount of ground coffee container is 150g, make sure the coffee ground shall not overow.
The appliance must rest for 30 minutes if it is operated for 5 minutes continuously. And it is suggested to ope-
rate this appliance for less than 90 seconds per time and minimum 90 seconds rest time must be maintained
between continuous two cycles.
If there is resistance while adjusting ,the grind size should be adjusted while the motor is running to prevent
burr jamming.
When desired grinding time has reached, the coffee grinder will stop working automatically and go back to
standby mode.
Unplug the appliance, remove the ground coffee container lid and pour out the coffee ground directly.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BP580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BP580 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info