Manual Beper BP400 (page 8 of 40) (English, German, Dutch, French, Italian, Spanish)

710278

Zoom out

Zoom in

1/40

Multi-function grater and slicer Use instructions

Description of the product Fig. A

1. Pusher

2. Filling tube

3. Slicing cone

4. Julienne slicing cone

5. Fine grater cone

6. Coupling for cone

7. Operation button

8. Motor housing

9. Power cord

Instructions for Use Fig.B

Before the rst use it is advisable to clean all the components as indicated in the paragraph “Cleaning and

maintenance”.

Place the product in a vertical position on a at and stable surface.

Select the cone to use based on the desired cut. Insert the cone into the appropriate housing, then insert the

cone coupling into the coupling for cone placed on the motor housing and turn anticlockwise to lock the compo-

nents so assembled.

Connect the power cord to the electrical outlet.

Insert the food through the lling tube, and push the food using the pusher.

It is recommended to cut the food into small pieces before processing.

Press the operation button and keep it pressed for the time necessary for complete processing of the food.

To change the cone, turn the lling tube clockwise, remove the cone in use and replace it with the desired one.

Make sure the product is switched off and unplugged before proceeding with this operation.

Cleaning and maintenance

It is recommended to clean the appliance immediately after use.

Disconnect the plug from the socket.

Remove the accessories from the motor housing.

Handle the cones with care because the blades are extremely sharp.

The parts that can be washed in water or in the dishwasher are the cones, the lling tube and the pusher.

Do not use grainy detergents and abrasive cloths; could damage the appliance.

The motor housing, the cable and the plug must be cleaned only with a damp cloth; do not immerse them or

pass them under water.

Make sure that the appliance with all its parts will be dry before using it again and before storing the product.

Technical data

Power: 430W

Power supply: 220-240V ~ 50 / 60Hz

For any improvement reasons, Beper reserves the right to modify or improve the product without any

notice.

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires

that old household electrical appliances must not be disposed of in the normal unsorted municipal

waste stream. Old appliances must be collected separately in order to optimize the recovery and

recycling of the materials they contain, and reduce the impact on human health and the environment.

The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you

dispose of the appliance, it must be separately collected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beper BP400 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beper BP400 Manual

Product: