710442

Beper BC130 Manual

12
Zoom out
Zoom in
Previous page
1/44
Next page
12
Bread maker Use instructions
SOME WARNINGS:
This appliance is intended to be used in household only
Do not touch hot surfaces.
To protect against electric shock, do not immerse cord, plugs, or housing in water or other liquid.
Close supervision is required during use and when the appliance is used in the presence of children.
Unplug from outlet when not in use and before cleaning. Let the appliance cool down before cleaning.
Do not use outdoors.
Do not let cord hang over edge of table or hot surface.
Do not place on or near hot and/or gas sources.
Disconnect the appliance from the socket when not in use.
Do not operate the appliance for other than its intended use.
The appliance is not intended to be operated by means of an external timer or separate remote-control system.
Always use the appliance on a at and stable surface.
Do not operate the appliance without ingredients.
Do not operate the appliance without bread pan.
Do not touch any moving or spinning parts of the appliance when in use.
At the end of the baking, to remove the bread from the pan use only a plastic spatula. Never beat the bread pan
or use metal utensils.
Aluminium or paper card must not be inserted into the bread pan.
Never cover the bread maker when in use.
Description of the product: Fig.A
1. Lid
2. Handles
3. Window
4. Bread pan
5. Control panel
6. Housing
7. Kneading blade
Accessories:
8. Hook
9. Measuring cup
10.Misuring spoon
Use of the appliance:
As soon as the bread maker is plugged into the power supply, a beep will be heard and “3:00” appears in the
middle of the display, at the same time on the right bottom corner the number “1”, they are the default settings.
The arrows will show the default settings “Medium” and “900g”
START/STOP button:
The button is used for starting and stopping the selected baking program.
Any other button is inactivated except the START/STOP button after a program has begun.
To stop the program, press the START/STOP button for approx. 2 seconds, till a beep will be heard.
PAUSE function:
After procedure starts up, you can press START/STOP button once to interrupt at any time, the operation will be
paused but the setting will be memorized. Touch START/STOP button again to re-start the procedure. Within 10
min without touching any button, the program will continue automatically.
MENU button:
It is used to set different programs. Each time it is pressed (accompanied by a short beep) the program will vary.
Press the button continuously till the desired program will be shown on the display. The selectable programs
will be as below:
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BC130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BC130 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info