710528

Beper BB103 Manual

9
Zoom out
Zoom in
Previous page
1/28
Next page
9
EN
Electric Kettle Use Instructions
HOW TO USE IT ?
1. Place the kettle on a stable surface.
2. Remove the kettle body (F) from the base (I) and ll it with water, respecting MIN and MAX levels indicated on
the water level indicator (E). Water can be lled by opening the lid (A) or through the pouring spout (B). Close the
lid and put the kettle body (F) on the base (I). Plug the appliance to the electric socket.
3. Press on/off switch (G) downwards and the kettle starts to operate. The power indicator (H) lights up. When
both the switch and the light turn off, water is ready to be used. Press on/off switch downwards to interrupt the
cooking anytime in case of necessity.
4. Lift the kettle body (F) only by the handle (D).
The kettle body becomes very hot and must not be touched directly with hands.
5. Disconnect the cord supply form the electric socket.
To prepare tea with tea leaves:
1. Remove the lid (A) from the kettle body (F).
2. Add the desired quantity of tea leaves into the tea lter (C).
3. Insert the open edge of the lter (C) to the lower part of the lid (A) until it ts in place.
4. Put the attachment of lid and lter slowly inside the kettle with water already ready (If necessary switch on the
kettle the second time).
5. If tea is not to be served immediately after the brewing time, it is recommended to remove the lter with used
tea leaves from the hot water to avoid their prolonged contact with water, that may alter the avour and taste of
tea.
6. Close the kettle with the lid after removing the lter.
CLEANING
1. Unplug the appliance from the socket.
2. Let it cool down and clean with a damp sponge.
3. Do never use abrasive sponge to clean it.
4. Clean regularly, at least one a month if the water is had or more if the water is very hard.
To remove lime scale, use:
White wine vinegar 8°:
Fill the kettle with ½ liter of vinegar.
Let it for about one hour without heating it.
Empty the kettle and rinse 5 or 6 times.
Repeat if necessary.
Acid citric:
Make boiled 1 liter of water – add 25 g of acid citric and let it rest for about 15 minutes.
Empty the kettle and rinse it 5 or 6 times.
Repeat if necessary.
Do not use other methods or detergents to remove limescale.
In case of :
Use while empty
The kettle is on but without water in or the limescale activates the safety system and blocks the unit: let the
kettle cool down and ll it with water. Use the on/off switch to turn it on: the kettle will start again after approx.
15 minutes.
Smelly water
It does happen when the kettle is new. For the rst times of use, throw away water. If the problem remains, ll
the kettle to MAX. level, and add 2 spoons of bicarbonate; boil it, throw away water and rinse the kettle body.
TECHNICAL DATA
Power: 1850 - 2200W
Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BB103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BB103 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info