710400

Beper BA010 Manual

8
Zoom out
Zoom in
Previous page
1/32
Next page
8
Vacuum sealer Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other uids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly ammable mate-
rials, gases, burning ames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
PRODUCT DESCRIPTION Fig.A
1. Dry food
2. Moist food
3. Stop
4. Sealing function
5. Vacuum and sealing function
6. Cutter
7. Unlock buttons
8. Lower stop line
Heat sealing
The bag width must not exceed 28 cm otherwise it cannot be welded correctly.
Use only nylon-PE lms with a structure (points or grooves) on one side and a thickness of approximately 0.15
-0.30 mm. Otherwise the weld seam will not be tight and the appliance may be damaged. The quality of the weld
seam will vary depending on the type and thickness of the bag.
To seal put the bag inside the product, close the top cover until it is locked and press the desired function.
The bag opening must lie at on the welding wire. Otherwise, welding will not work properly.
The seal presses the bag onto the sealing wire to create a smooth seam. Make sure that both corners of the lid
are closed. If necessary, press the top cover again so that the lid clicks in audibly and rmly.
Make sure that the weld is properly closed. A correct weld should be a smooth, straight strip without wrinkles.
Fill the bag in such a way that no food residues or liquids can escape and enter the machine during sealing.
Wait 15 seconds before sealing the next bag to allow the appliance to cool down.
9. Vacuum chamber
10. Sealing line
11. Sealing rubber
12. Locking hooks
13. Roll case
14. External suction interface
15. External suction switch
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BA010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BA010 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info