710536

Beper 90836 Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
10
Electric Tea pot Use instructions
BEFORE USING YOUR TEA KETTLE
If you are using the tea kettle for the rst time, it is recommended that you should clean your tea
kettle before use by boiling a full tea kettle of water twice, do not place tea and in the lter and then
discarding the water.
NOTE: the max capacity of tea kettle is 0.7L.
OPERATION OF YOUR TEA KETTLE
1. To ll the tea kettle, remove it from the power base and open the lid by pressing the open lid but-
ton, ll with the desired amount of puried water, and then close the lid. The water level should not
exceed MAX marks or sit below MIN level. Too little water will result in the kettle switching off before
the water has boiled.
NOTE: Do not ll the water over the maximum level, as water may spill out of the spout when boiling.
Ensure that the lid is rmly in place before plugging the power outlet.
2. Position the tea kettle on the power base.
3. Open the lid, take out lter, then put tea into the lter and place it back properly in the tea kettle,
and then close the lid.
4. Connect the plug into a power outlet. Turn on the switch by pressing it, the indicator will light up.
Then start to boil the water. You can shut off the power by turning off the switch at any moment du-
ring boiling water. If you want to boil water again, only turn on the switch directly to restart the kettle.
5. The thermostat will operate automatically once the water has boiled. If you do not turn off the
switch or unplug the power cord, when the temperature of water reduces, the thermostat will operate
again and boil the water again. The thermostat will cycle on and off to maintain the temperature of
water on the higher temperature.
6. If you want to serve the tea or coffee. Turn off the switch or unplug the power cord, and lift the tea
kettle from the power base and then pour the tea or coffee.
NOTE: operate carefully when pouring the tea from your tea kettle,as boiling tea or coffee will scald.
7. The tea kettle will not re-boil until the switch is pressed again. The kettle may be stored on the
power base when not in use.
Note: always disconnect the power supply when not use.
BOIL-DRY PROTECT
Should you accidentally let the tea kettle operate without water, the boil-dry protection will automa-
tically switch off the power. If this occurs, allow the tea kettle to cool before lling with cold water
and re-boiling.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and allow it to cool before cleaning.
1. Never immerse the tea kettle, power cord or power base in water, or allow moisture to contact
with these parts.
2. Wipe the appearance of body with a damp cloth or cleaner, never use a poisonous cleaner.
3. The lter can be immersed in the water for cleaning. And you can use the brush to clean the lter.
Before cleaning, discard the tea residue rstly.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the tea
kettle.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 90836 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 90836 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Beper 90836

Beper 90836 Additional guide - English, German, French, Italian, Spanish - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info