710517

Beper 90521 Manual

16
Zoom out
Zoom in
Previous page
1/68
Next page
Settings
The operating dial has three settings:
1. Dispenses steam or hot water through the steam nozzle.
2. O Pump is switched OFF.
3. Pump is ON; espresso is dispensed.
Once the operating dial is turned from the neutral position O, the steam nozzle or the boiler outlet will
open, steam or hot water will then be discharged. Once the dial is turned back to O, the discharge
of hot water or steam will stop.
Before using for the rst time
Before using the appliance for the rst time, all detachable parts must be cleaned as outlined in
the “Care and Cleaning” section. Ensure all parts are retted before plugging the appliance into the
mains. Flush the system through with hot water as follows:
1. Fill the water container with water.
2. Place the lter sieve into the porta lter (without any ground coffee).
3. Place a suitably sized container under the boiler outlet openings.
4. Plug the appliance into the mains.
5. Set the HOT WATER/STEAM selector to the hot water position.
6. Using the ON/OFF Switch, turn the appliance on, and turn the operating dial to
Hot water will be dispensed from the outlets.
7. Leave the appliance running until half of the water from the water container has been dispensed.
8. Switch off the pump by turning the operating dial to a neutral position.
9. Empty the container and place it under the steam nozzle. Turn the operating dial to
10. Water will be dispensed through the steam nozzle as soon as the heating light goes out. Care
must be taken to avoid burning.
11. When the amount of water left in the water container has reached the ‘Min’ mark, switch the
pump off by turning the dial to the neutral position.
12. If the appliance has not been used for a long period of time, the same procedure should be used.
BREWING SYSTEM
The brewing system consists of the following parts:
The boiler outlet is marked with and symbols to support the attachment of the porta lter.
The porta lter has 3 protrusions on the rim which help you lock the porta lter onto the boiler outlet.
INSERTING/REMOVING THE PORTA FILTER
1. Place the porta lter (which has already been lled with ground coffee) with the handle in line with
the unlock icon on the left side of the coffee spout.
2. Then push the porta lter upwards and under the machines espresso spout. To ensure it is fully
inserted, hold the porta lter in one hand and place the other hand on top of the machine.
3. Rotate the handle in an anti-clockwise direction until it is under the lock icon on the side of the
espresso spout.
16
Espresso machine Use instructions
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 90521 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 90521 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info