710333
9
Zoom out
Zoom in
Previous page
1/36
Next page
9
XXL juice extractor Use instructions
EN
IMPORTANT WARNINGS
Whenever you use electric appliances, take all the precautionary me-
asures explained below:
This appliance is for domestic use only and must not be used for
commercial or industrial purposes.
• Carefully read these instructions.
• Ensure that the electrical voltage of the appliance corresponds with
that of your electric network.
• Never immerse the motor base in water or other liquids as to avoid
electric shocks.
This appliance MUST NOT BE USED BY CHILDREN, keep
out of the reach of children.
Always unplug the appliance when it is not in use and before remo-
ving its components or cleaning it. Use the special dish-press only.
Assure you that the centrifuge cap is in its own seat and the blocking
tongues have been coupled before you turn on the motor.
Do not open the locking tabs while the motor is running.
REMEMBER: if the lid locking tabs and the pulp container are not
correctly t, the centrifuge will not start. In this case, the motor stays
idle even if the switch is turned to ON.
• When you have nished using the appliance, press the switch.
Assure you that the motor is completely still before you open the
device and the plug is not connected to the current-tap
Always use the presser to push the food to be centrifuged, never
use your ngers. If the appliance is malfunctioning, turn it off imme-
diately, unplug, clean the various components and apply to an autho-
rized Technical Assistance Center.
NOT USE THE DEVICE IF THE WRAPPING,THE
CLOSING TONGUES,THE ELECTRIC CABLE OR THE
PLUG TURN OUT TO BE DAMAGED. IN THIS CASE
TAKE THIS TO THE NEAREST AUTHORIZED ASSI-
STANCE CENTRE
If the feeding cable is damaged, it must be sobstituted by the maker
or by its technical assistance service or by operators with a similar
qualication, in order to prevent every risk.
Using non-original or unauthorized attachments may prejudice the
safety and functioning of this ARIETE appliance.
• Not use the device if the rotating cilinder turns to be damaged
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 90424 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 90424 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info